Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in North Richland Hills, TX
Calder Gate Repair handles gate systems across North Richland Hills, where long driveway gates on shifting clay soil are the norm. Most gate issues here come down to two things: ground movement knocking posts and frames out of alignment, and Texas heat and storms wearing down electronics. We’re the gate repair specialist inside the Relay Home Co. family, and every job starts with a written price before any work begins. Call (682) 432-9830 any time for a free estimate.
Why North Richland Hills Homes Are Different
North Richland Hills was built out from the 1970s onward, and that matters for gate work. Many older neighborhoods like Smithfield and Home Town still have original chain-link driveway gates on galvanized pipe frames. Those rust through at the bottom hinge over time, and the expansive clay beneath them expands and contracts with every wet-dry season, silently knocking posts out of plumb. The result: gates that sag, drag, or stop latching without warning.
Newer subdivisions from the 1990s and 2000s are a different story. Those brick-and-stone homes with long driveway gates on metal posts can settle unevenly, too, but the failure usually shows up in sensor alignment and opener strain. North Richland Hills summers beat down with UV that degrades plastic gear racks and control boxes. Then a thunderstorm rolls through, lightning strikes somewhere nearby, and a power surge fries a circuit board. We see both failure modes every week. Sensor realignment and post stabilization are the bread-and-butter here, but surge protection and weatherproofing are what keep a repaired gate working through the next storm season.
Styles & brands we work with
Our Main North Richland Hills Services
North Richland Hills homeowners call us most often for two things: a gate that won’t open or close properly, and an opener that has stopped responding. Here’s what each involves locally.
Gate Repair in North Richland Hills
Gate repair in North Richland Hills usually means correcting what the clay soil has done to a gate’s frame or hinges. We realign posts that have shifted, replace rusted bottom hinges on older pipe frames, and reset latches that no longer catch. If a gate has been dragging across a driveway for months, the rollers and track may need attention, too. Every repair gets a written guarantee and a free second visit if it fails within 365 days. Gate Repair in North Richland Hills
Electric Gate Repair in North Richland Hills
Electric gates fail here for predictable reasons: storm surges take out circuit boards, UV breaks down plastic gear racks, and shifting posts cause sensors to lose alignment so the gate thinks something is in the way. We diagnose the electrical path from opener to motor to limit switch, the small sensor that tells the gate when to stop. Then we quote a written price before turning any bolt. Electric Gate Repair in North Richland Hills
Gate Opener Repair in North Richland Hills
When a North Richland Hills opener hums but won’t move the gate, or won’t respond to a remote or keypad, it’s often the control board, a stripped gear, or a failing capacitor. Heat accelerates all of those. We stock common opener parts locally and train our technicians on the major brands, so most opener repairs go from diagnosis to fix in a single trip. We quote the full price up front, before any work starts. Gate Opener Repair in North Richland Hills
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in North Richland Hills
We see a lot of Linear and Viking openers on older North Richland Hills properties, plus Ghost Controls and DoorKing on newer installs. Common boards, gears, and remote receiver parts are stocked locally, so most repairs don’t wait on shipping. Our brands page lists the full lineup.
Pricing for Gate Company in North Richland Hills, TX
| Service | Typical range in North Richland Hills |
|---|---|
| Gate opener circuit board replacement | $180 – $340 |
| Limit switch replacement and adjustment | $120 – $220 |
| Sensor (photo eye) realignment or replacement | $90 – $180 |
| Gate hinge replacement (single hinge) | $80 – $160 |
| Post stabilization and re-alignment | $200 – $450 |
| Rusted bottom hinge repair on pipe frame | $150 – $300 |
| Surge protection install for opener | $80 – $180 |
| Service call with diagnosis | $60 – $120 |
Prices here reflect North Richland Hills conditions. Clay-related frame work and post stabilization run higher because the repair often involves new concrete or sleeve anchors. Storm damage and surge repairs vary based on how many boards got hit. Whatever the job, you get a written price before anything starts, and the number on the invoice matches the number you agreed to.
See the difference
Before
After
Before
After
Before
AfterNeighborhoods We Serve in North Richland Hills
We work across the full city, from the older streets of Smithfield and Home Town to newer developments east of Davis Boulevard. Response to most North Richland Hills calls is same-day or next-day, depending on when you call and what parts the job needs.
- Smithfield
- Home Town
- Fossil Creek
- Cavanaugh
- North Hills
Service Area – Cities Near North Richland Hills
Beyond North Richland Hills, we cover the surrounding area for gate repair and opener work. That includes Haltom City, TX to the south, Colleyville, TX to the northeast, Fort Worth, TX to the southwest, and Keller, TX to the north. If you’re unsure whether your address falls in our coverage map, call us and we’ll confirm it in under a minute.
Serving North Richland Hills, TX - Our Local Coverage Area
We’re based in the North Richland Hills area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in North Richland Hills
Most North Richland Hills calls are scheduled same-day or next-day. A live person answers every call 24/7, and you get a trackable arrival time when your technician is dispatched, not a vague four-hour window.
Most repairs like hinge replacement, sensor realignment, or opener board replacement don’t require a permit. If your job involves a full post reset or new concrete work, we’ll tell you what’s needed before anything starts and factor any city requirements into the written quote.
Estimates are free. Call (682) 432-9830, describe the gate issue, and we’ll give you a preliminary price range over the phone, then a written price at the door before any work begins.
Contact Calder Gate Repair in North Richland Hills
If your gate is sagging, stuck, or suddenly silent, call Calder Gate Repair at (682) 432-9830. A real person answers around the clock, and every repair comes with a written price up front, a written 365-Day Done Right Promise, and a free second visit if the fix doesn’t hold. Nico Alvarez leads our North Richland Hills crews, and we’re ready when your gate isn’t.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What North Richland Hills Customers Say
"Booking was easy and the job was done quickly."
- Seth R."Slide gate wheels replaced. Glides smoothly now."
- Mark T."Booked online. The tech texted his ETA and arrived on time. Gate opener was dead; he replaced the control board and tested the sensors."
- Terry W.