Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Haltom City, TX
Gate repair in Haltom City usually costs between $140 and $380 for most common fixes, and a technician can often be at your property the same day you call. Calder Gate Repair handles everything from sagging chain-link gates on 1960s brick ranches to heavy sliding gates behind industrial buildings off Denton Highway. If your gate won’t open, won’t close, or has started scraping the concrete, call us at (682) 432-9830 and we’ll give you a written price before any work starts.
Why Haltom City Homes Are Different
Haltom City’s housing stock runs heavily to 1950s through 1970s single-family brick ranch homes, and most of them have chain-link or tube steel gates that were installed when the house was built. Those gates have now been standing for fifty or sixty years on un-reinforced concrete posts. The expansive clay soil under Tarrant County doesn’t sit still – it swells when wet and shrinks when dry, which slowly pushes gate posts out of plumb and throws hinges out of alignment. We see it constantly in the older neighborhoods east of Denton Highway, where a gate that once swung cleanly now drags across the driveway apron.
The industrial and commercial strip along Denton Highway and near the railroad adds another layer. Those properties run heavier sliding and swing gates, often on steel frames that have been welded before. Spring storm season brings wind and hail that dents panels and knocks ornamental gates off their tracks. A Haltom City gate repair often isn’t a simple hinge adjustment – it’s cutting and re-welding a bracket at a custom angle so the gate hangs true even when the post has shifted two inches out of level.
Styles & brands we work with
Our Main Haltom City Services
Most Haltom City calls fall into two buckets: a gate that’s physically failing – sagging, scraping, latch not catching – or an electric opener that’s stopped responding. Here’s how each one works here.
Gate Repair in Haltom City
When a gate in Haltom City sags or won’t latch, the cause is usually the clay soil underneath it, not the gate itself. We cut and re-weld hinge brackets at a corrected angle, reinforce concrete posts where needed, and replace bent or rusted steel sections on tube gates and chain-link alike. On commercial properties near the railroad, we work on heavy sliding gates that have worn their roller tracks. The goal is a gate that swings freely and latches without you having to lift it. Read more about Gate Repair in Haltom City.
Electric Gate Repair in Haltom City
Electric gates in Haltom City take a beating from storms and shifting ground. An opener that was aligned last year can be fighting a gate post that’s moved a half inch since then. We test the full system – motor, limit switches, safety edges, and the gate’s physical alignment – because an electric gate that’s out of line will burn out its own motor. If your gate opens halfway, reverses on its own, or just hums without moving, that’s an electric issue we can pin down and fix. Details are on the Electric Gate Repair in Haltom City page.
Gate Opener Repair in Haltom City
Gate opener repair in Haltom City usually means one of two things: the opener has failed entirely, or it’s responding incorrectly – opening when it should close, stopping at the wrong point, or ignoring the remote entirely. We work on Ghost Controls, DoorKing, Elite, and Mighty Mule openers, among others, and we stock common replacement parts locally so most opener jobs don’t wait on shipping. We’ll diagnose the board, the limit switch, or the drive mechanism, then give you a written price before touching anything. See Gate Opener Repair in Haltom City for specifics.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Haltom City
Our technicians train on nine major opener brands, and the ones we see most often in Haltom City are Ghost Controls on residential swing gates, DoorKing and Elite on commercial slide gates, and Mighty Mule on DIY-installed ranch gates. Common parts – control boards, remote receivers, limit switches – are stocked in our DFW metro office, so we’re not waiting on a distributor for most jobs. You can see the full list on our brands page.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Haltom City, TX
| Service | Typical range in Haltom City |
|---|---|
| Gate not opening or closing | $140 – $390 |
| Gate sagging or dragging on concrete | $120 – $320 |
| Gate latch not catching | $80 – $250 |
| Hinge re-weld and bracket correction | $180 – $520 |
| Gate post reinforcement | $220 – $650 |
| Opener motor replacement | $310 – $710 |
| Control board replacement | $220 – $550 |
| Limit switch replacement | $110 – $280 |
| Safety edge or photo eye repair | $120 – $310 |
| Remote receiver or keypad repair | $90 – $240 |
Prices in Haltom City run higher when a gate post has shifted badly enough that we’re re-welding brackets at a custom angle rather than swapping in a stock part, and commercial slide gates off Denton Highway tend to push labor up because the hardware is heavier. Whatever the job, you get a written price before we start, and the number on the invoice is the number you agreed to. Our 365-Day Done Right Promise covers every repair: if it fails within a year, we come back and make it right at no charge.
Neighborhoods We Serve in Haltom City
We work all over Haltom City, from the brick ranches east of Denton Highway to the commercial properties along the railroad corridor and the neighborhoods south of NE 28th Street. Typical response time in Haltom City is same day for most repairs, and you’ll get a live arrival time you can track.
- East Denton Highway neighborhoods
- Broadway Heights
- Fossil Creek area
- Haltom Road corridor
- Commercial districts near the railroad
Service Area – Cities Near Haltom City
Our Haltom City crews also cover the surrounding Tarrant County communities. If you’re looking for gate work in Fort Worth, TX, North Richland Hills, TX, Keller, TX, or Colleyville, TX, we can help there too – same guarantees, same written pricing.
Serving Haltom City, TX - Our Local Coverage Area
We’re based in the Haltom City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Haltom City
In most cases, yes. We run local Haltom City crews and schedule same-day visits for gate repairs when you call before early afternoon. You’ll get a live arrival time on your phone, not a four-hour window, so you can plan around the visit instead of waiting by the door.
For most repairs – hinge re-welding, opener replacement, latch fixes – no permit is required in Haltom City. If you’re replacing a gate post or adding a new electrical run for an opener, we’ll tell you during the estimate whether a permit applies to your specific property. Call (682) 432-9830 and we’ll walk you through it.
Yes. We service the heavy sliding and swing gates on commercial properties along Denton Highway and near the railroad, including DoorKing and Elite opener systems. Commercial jobs get the same written price and 365-Day Done Right Promise as residential repairs.
If your gate is stuck, sagging, or refusing to open, call Calder Gate Repair at (682) 432-9830. You’ll get a real person on the phone, a written price before work begins, and a repair backed by our 365-Day Done Right Promise.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Haltom City Customers Say
"Slide gate wheels replaced. Glides smoothly now."
- Mark T."Booked online. The tech texted his ETA and arrived on time. Gate opener was dead; he replaced the control board and tested the sensors."
- Terry W."Safety sensors realigned. Works fine. Photo eyes were dirty and out of line. Gate now stops when it should."
- Raul A.