A Calder company - serving Fort Worth, TX
Electric Gate Repair in North Richland Hills, TX | Calder Gate Repair Fort Worth

Electric Gate Repair in North Richland Hills - Same-Day Repair, Priced Before We Start

Most gate faults are diagnosed and fixed on the first visit. You get the price before we start, and the gate is left working and safe before we leave.

We answer around the clock

13+
Cities Served
Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee
Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Fast, Reliable Electric Gate Repair Across North Richland Hills

Electric gate repair in North Richland Hills usually means one of three things: a motor that won’t move, a gate that grinds or binds on its track, or a sensor that refuses to register your car. Most repairs run between $185 and $475 before parts, and our techs carry common boards, sensors, and gear racks on the truck so we can often finish the job in a single visit. If your gate is stuck open or shut, call (682) 432-9830 and a live person picks up, day or night. We know the clay soil here, the long driveways off Rufe Snow Drive, and the older Smithfield gates that have been settling for decades.

Call (682) 432-9830

Why Calder Gate Repair Fort Worth Is North Richland Hills’s Preferred Electric Gate Repair Company

North Richland Hills is not Fort Worth and it is not Keller. The mix of 1970s ranch homes along Chapman Road, newer brick-and-stone subdivisions near Walker’s Creek Park, and the older chain-link driveways in Home Town means gate systems here fail in ways a generic opener technician misses. Our crews know that a gate that worked fine in February might bind by April because the Woodbine clay underneath shifted after spring rain. That local read on soil movement is why homeowners call us first.

We’re part of the Relay Home Co. family, established in 2009, and independently operated by Calder Gate Repair Fort Worth. Every tech is background-checked and arrives in uniform with a live, trackable arrival time on your phone. You’ll know who is coming, when they’ll pull up, and what the repair will cost before a wrench touches a single bolt. That is The Relay Standard, and we put it in writing on every job.

Reviews from North Richland Hills customers consistently mention two things: our techs explain what failed and why, and the price quoted at the door matches the invoice. Nico Alvarez, who leads our Fort Worth team, insists on that second point across the board. No surprise line items. No “we found something else” markup games. Just straightforward electric gate repair backed by our 365-Day Done Right Promise: if the repair fails within a year, we return at no charge. North Richland Hills homeowners in 76180, 76182, and 76117 get that guarantee in writing every time.

Explore

Styles & brands we work with

Wrought iron
Wrought iron
Wood & steel frame
Wood & steel frame
Farm & ranch
Farm & ranch
Sliding driveway gates
Sliding driveway gates
LiftMaster operators
LiftMaster operators

Gate Access Control in North Richland Hills

Gate Access Control in North Richland Hills means adding or upgrading the system that decides who opens your gate: keypads, remote controls, intercom panels, vehicle loop detectors, and sometimes smartphone access through an app. Older properties, especially the ranch homes built between 1970 and 1990, often still have a basic keypad wired to a control board with no modern safety features. A full access control retrofit on a North Richland Hills driveway typically runs $600 to $2,400 depending on whether you need a new operator, keypad, and wiring, or just a board swap and remote programming.

Keypad and Remote Programming

Replacing a worn keypad membrane or adding a new remote to an existing opener runs $95 to $180 in North Richland Hills when the control board is healthy. If your system uses a 1980s-era board with no learning-code capacity, we’ll usually recommend a board replacement rather than fighting obsolete wiring.

Vehicle Loop Detector and Safety Sensors

Long driveways in neighborhoods like Home Town and Smithfield frequently rely on a buried loop detector to open the gate automatically when a car pulls up. When the loop fails, the gate just sits there. Loop detector repair or replacement runs $275 to $600, and on North Richland Hills clay, we always check the loop wire depth because ground shifting can shear the wire clean.

Commercial Gate Operator in North Richland Hills

Commercial Gate Operator work in North Richland Hills covers the heavier operators used on business entries, church parking lots, and multi-tenant properties along Davis Boulevard and Loop 820. These systems cycle hundreds of times a day, which means a worn gear, a failed limit switch, or a fried control board can shut down access entirely. A commercial operator replacement in North Richland Hills typically runs $1,800 to $4,500 including the operator, mounting hardware, and programming, with the final number depending on gate width, weight, and whether the existing post sleeves can be reused.

High-Cycle Operator Replacement

When a commercial gate cycles constantly, a residential-grade board burns out fast. We specify operators rated for high-duty cycles and install them with proper weatherproofing and surge protection. The labor and setup for a high-cycle commercial operator in North Richland Hills runs $1,200 to $2,800, plus the operator itself.

Safety Loop and Entrapment Retesting

After any commercial operator repair in North Richland Hills, we retest both entrapment zones with a calibrated force gauge. This is not optional: Texas follows UL 325 safety standards, and a gate that closes with too much force is a liability every business owner should refuse to accept. Retesting and certification paperwork is included on every commercial repair.

Trusted Brands We Service in North Richland Hills

Our techs are factory-familiar with nine major opener brands, and in North Richland Hills we see a lot of LiftMaster operators on 1990s and 2000s homes, plus Ghost Controls, Mighty Mule, DoorKing, and Elite on ranch gates and rural driveways. We keep common parts for these brands on our service trucks so we do not have to put a repair on hold while a board ships from Dallas. If your opener died due to a lightning strike near Chapman Road, or a UV-cracked gear rack snapped under the August sun, odds are strong we have the replacement part on hand.

Common Electric Gate Repair Problems We See in North Richland Hills Homes

  • Clay-driven post heave from spring rains. The Woodbine formation under North Richland Hills is an expansive clay that can shift vertically by up to 4 inches between wet and dry seasons. That movement torques hinge posts out of plumb, grinds the leaf against the rack, and kills the close-limit switch.
  • UV-brittle plastic gear racks on 1990s-era operators. Intense summer sun cracks the gear rack teeth, leaving the gate stuck mid-travel or jerking forward in short, violent bursts. We often see this on the older Mighty Mule and Elite openers still running in Smithfield and Home Town.
  • Lightning-fried control boards on long driveway runs. Severe thunderstorms roll through North Richland Hills every spring, and a strike near a long run of unshielded wiring sends a surge straight into the board. A surge-damaged board usually needs replacement, not repair, and we strongly recommend adding a surge protector at the operator.
  • Rust-through on galvanized pipe gate frames. The original 1960s-80s chain-link driveway gates in Home Town used galvanized pipe that rusts through at the bottom hinge after decades of soil moisture and Texas humidity. The fix involves sleeve anchors and fresh concrete around a new post, which we keep stocked for quick turnarounds.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Pricing for Electric Gate Repair in North Richland Hills, TX

A typical electric gate repair in North Richland Hills runs $185 to $475 before parts. Here’s the honest breakdown: a loose or misaligned hinge post on clay-shifted ground usually runs $225 to $400, a keypad or remote programming job is $95 to $180, a safety sensor or photo-eye replacement runs $150 to $300, and a full control board replacement runs $300 to $750 depending on brand. Parts are quoted separately and you approve every dollar before we start. There is no dispatch fee for repairs in North Richland Hills, and every repair estimate is free. Most jobs are completed in one visit since our trucks carry common LiftMaster, Ghost Controls, Mighty Mule, DoorKing, and Elite components. Call (682) 432-9830 for a written price before any work begins.

We Also Serve Cities Near North Richland Hills

Our Electric Gate Repair team covers North Richland Hills and the surrounding communities including Haltom City, Colleyville, Fort Worth, and Keller. If your gate is stuck and you’re a few blocks from NRH, we’ll still get a tech out to you with the same live arrival time and written pricing.

Serving North Richland Hills, TX - Our Local Coverage Area

We’re based in the North Richland Hills area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.

FAQs About Electric Gate Repair in North Richland Hills

Call Calder Gate Repair Fort Worth for Electric Gate Repair in North Richland Hills

If your gate won’t open, grinds, or the sensors keep flagging a blockage that isn’t there, call (682) 432-9830. A real human answers 24/7, and a background-checked, uniformed tech can be at your North Richland Hills home with a live arrival time you can track from your phone. Written price before we start. 365-Day Done Right Promise on every repair. Free second visit if it fails. That’s how electric gate repair should work in North Richland Hills.

Written by Nico Alvarez, Owner at Calder Gate Repair Fort Worth, serving North Richland Hills through the Relay Home Co. family since 2009.

Why North Richland Hills Chooses Calder Gate Repair Fort Worth

We set the standard for electric gate repair in North Richland Hills.

30-60 Min Response

Fast dispatch across North Richland Hills. Same-day and after-hours emergency service available.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in North Richland Hills

Getting your electric gate repair handled is simple and fast.

1

Call or Request a Free Estimate

Tell us about your electric gate repair needs and we provide an upfront, transparent quote - no obligation, no hidden fees.

2

Licensed Technician Dispatched

A background-checked, certified technician arrives in North Richland Hills - typically within 30-60 minutes, with parts stocked on the truck.

3

Problem Solved, Guaranteed

We complete the job to your full satisfaction, backed by our warranty and 100% satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees - talk to a local electric gate repair pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What North Richland Hills Customers Say

Trusted by homeowners across North Richland Hills and surrounding areas.

★★★★★

"Safety sensors realigned. Works fine. Photo eyes were dirty and out of line. Gate now stops when it should."

Raul A. · Verified customer
★★★★★

"Booking was easy and the job was done quickly."

Seth R. · Verified customer
★★★★★

"Slide gate wheels replaced. Glides smoothly now."

Mark T. · Verified customer

Ready for Electric Gate Repair in North Richland Hills?

Call now for a free estimate - or request one below. Licensed, insured, and here with fast after-hours help in North Richland Hills.

(682) 432-9830

Request a Free Estimate in North Richland Hills

Tell us about your electric gate repair needs - we'll respond within the hour.

By sending this request, you confirm you have read our Privacy Policy and agree to be contacted by telephone, text message, or email about your request, including by the independent professionals who may fulfill it.

Prefer to text? Text Now
Local Service Coverage
Call Now - 24/7 Dispatch