Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateTrusted Electric Gate Repair for Fort Worth Homeowners
An electric gate that won’t open in Fort Worth is more than a hassle. It traps your car in the driveway, leaves your property unsecured, and always seems to happen on the morning you’re already running late. Calder Gate Repair offers our Electric Gate Repair in Fort Worth and across Tarrant County, serving the area since 2009 as part of the Relay Home Co. family. We answer every call with a live person, send a background-checked technician with a trackable arrival time, and put your price in writing before a single bolt gets touched. If you’re dealing with a dead opener, a grinding motor, or a gate that reverses for no reason, call (682) 432-9830 now and we’ll get it moving again.
Automatic Gate Repair
Automatic Gate Repair covers the full system that opens and closes your gate without you leaving the car: the opener arm, the control board, the safety sensors, the remote receivers, and the physical hinges and wheels that carry the load. You need it when the gate moves halfway and stops, the remote works only from three feet away, or the gate slams shut instead of easing closed. Calder Gate Repair Fort Worth diagnoses the whole system, not just the most obvious component. Most automatic gate repairs in this area run $185 to $420 before parts, depending on whether we’re replacing a sensor, rewiring a receiver, or rebuilding a hinge assembly. Nico Alvarez has seen enough Fort Worth gates to know that a half-fixed system fails again within weeks, so we always test the full open-close cycle before we leave.
Sensor and Safety Loop Failures
When the photo-eye sensors get knocked out of alignment or a buried loop detector fails, the gate either refuses to close or reverses on nothing. We check alignment, clean the lenses, and test loop frequency with a meter. Most sensor repairs fall on the lower end of the price range above.
Remote and Receiver Issues
If new batteries don’t fix the remote, the problem is usually in the receiver board or antenna. We match replacement remotes to your opener’s exact frequency and can program a second remote on the spot. We’ll also clear out any old codes so a previous owner’s remote can’t open your gate.
Styles & brands we work with
Electric Gate Motor
Electric Gate Motor refers to the actual drive unit that pushes or pulls your gate along its track or swing arc. When it hums but doesn’t move, trips its breaker repeatedly, or makes a sound like rocks in a blender, the motor is your likely culprit. Calder Gate Repair Fort Worth works on motors for slide gates, swing gates, and overhead configurations. Motor repairs typically land between $240 and $520 in Fort Worth because the part itself is the bulk of the cost. A worn gear, a seized bearing, or a failed capacitor can all mimic a dead motor, so before recommending a replacement we bench-test the unit to isolate the failure. You get a written price for motor replacement or repair before we order anything.
Motor Replacement Decisions
If your motor is over ten years old and the control board is also failing, replacing both at once often costs less long-term than repairing one and waiting for the other to die. We’ll show you the condition of each part and give you a straight recommendation, not a sales pitch.
Capacitor and Gear Failures
A failing start capacitor makes the motor click and stall at startup. Stripped gears make it grind. Both are repairable without replacing the entire motor in most DoorKing and Elite units, which saves several hundred dollars. We keep common gears and capacitors on the truck.
Gate Access Control
Gate Access Control is the layer that decides who gets in: keypads, intercom systems, telephone entry units, car remotes, and the receivers or network modules tied to them. You need service when the keypad ignores a correct code, the intercom rings but won’t open the gate, or you can’t add new entry codes. Calder Gate Repair Fort Worth services access control on both residential gates and light commercial properties across Tarrant County. Access control repairs run $150 to $380 most of the time, since the issue is usually a wiring fault, a failed relay, or a keypad that needs replacement. We test every entry point after the repair and walk you through adding and deleting codes yourself so you’re not paying for a service call next time you lose a remote.
Keypad and Code Entry Problems
Keypads exposed to Texas sun and rain corrode internally even when they look fine outside. We replace worn keypads with weather-sealed models rated for our climate and program all existing codes back in before we leave.
Intercom and Telephone Entry
When visitors buzz and you can’t hear them or the gate won’t trigger from the app, we trace the signal path from the call station to the opener’s control board. We’re familiar with the common upgrades Fort Worth HOAs and small apartment properties use, and we can advise on whether your system just needs a fix or a modest modernization.
Commercial Gate Operator
Commercial Gate Operator refers to the heavy-duty drive units and control systems on gates serving businesses, apartment complexes, parking lots, and warehouse entries in Fort Worth. These systems cycle dozens or hundreds of times a day, so wear accelerates fast compared to a residential swing gate. Calder Gate Repair Fort Worth handles commercial slide operators, barrier arms, and heavy swing actuators, and we also provide Electric Gate Repair in Haltom City for local businesses. Repairs on commercial units typically run $350 to $800 in this market because the components are larger and the diagnostic time runs longer. We schedule commercial work around your traffic flow, not the other way around. Every commercial repair gets the same written price before work starts, the same 365-Day Done Right Promise, and a free second visit if the fix fails within the year.
High-Cycle Wear and Preventative Maintenance
A commercial operator that runs 300 cycles daily needs quarterly checks on chain tension, limit switches, and safety edges. We set up a simple maintenance schedule for businesses that can’t afford a gate that’s down during the morning rush. Preventative work costs less than half what emergency repairs do.
Vehicle Detection and Safety Loop Repairs
When delivery trucks trigger the exit loop but not the entry loop, or the arm comes down on a car, the loop detector or loop wiring is usually failing. We test loop inductance with a dedicated meter, repair or saw-cut and replace loops, and adjust hold-open timing so the gate doesn’t close on a vehicle. This is the most common commercial gate problem we fix in Fort Worth industrial parks.
Brands We Service
We work on Ghost Controls openers frequently, especially the residential swing and slide kits that are popular in north Fort Worth neighborhoods, and we offer our Electric Gate Repair in North Richland Hills for those nearby. Ghost Controls systems are generally straightforward to repair, and we stock their remote and receiver parts so you’re not waiting on a shipped component.
DoorKing is the backbone of older HOA and light commercial gates across Tarrant County. We’ve replaced hundreds of DoorKing control boards and loop detectors. Their systems age predictably, which means we can tell you within a few minutes of diagnosis whether your unit is worth repairing or has reached the end of its service life.
Elite and Mighty Mule round out the brands we see most at residential properties. Elite gates need careful limit switch calibration, and Mighty Mule openers are a favorite among DIY installers, which means we often get called to fix wiring that was never quite right to begin with. Whether you have one of these or any other make, we can help.
Signs You Need a Pro Right Now
- The gate reverses for no reason. Safety sensors, loop detectors, or a failing control board can cause phantom reversals. A gate that reverses unpredictably can hit a car or a person, and it’s a sign the safety system is no longer functioning correctly.
- The motor runs but the gate doesn’t move. Usually a stripped gear, broken chain, or sheared key inside the drive unit. Running the motor when the gate is jammed burns it out fast, so don’t keep pressing the remote. Call us first.
- You hear grinding or screeching during operation. Metal-on-metal noise means worn bearings, dry rollers, or misaligned tracks. Every cycle with that noise is making the repair more expensive.
- The remote only works from a few feet away. A receiver antenna problem or interference from a new nearby device can slash your range. The receiver needs testing, and no amount of fresh remote batteries will fix it.
- The gate sags and drags on the ground. Hinges, wheels, or the frame itself are failing. A dragging gate overworks the motor and guarantees an early motor death if it isn’t corrected.
See the difference
Before
After
Before
After
Before
AfterOur Process, Step by Step
- 1
Call and talk to a live person. You call (682) 432-9830, a human answers, and we schedule a visit with a trackable arrival time. No voicemail roulette, no four-hour windows, no chatbot deflection.
- 2
Diagnosis with the meter, not the guess. Our technician arrives in uniform, checks your opener brand and model, and tests the power supply, control board outputs, sensors, and mechanical components. We find the actual fault, not the most convenient one.
- 3
Written price, agreed before work. You get a written quote that explains the repair, the parts, and the total cost. The number on the invoice is the number we agreed to before the work starts. If it costs less, we bill less. It never costs more.
- 4
Repair and full-cycle testing. We complete the repair, run the gate through repeated open-close cycles, test every sensor and safety feature, and verify remotes and keypads work from the correct range. If you have a home automation setup, we confirm integration still functions.
- 5
Digital invoice and the Done Right Promise. You get a digital invoice you can pay from a link, plus before-and-after photos of the work. Every repair carries the 365-Day Done Right Promise in writing: if it fails within 365 days, we return and make it right at no charge.
How Much Does Electric Gate Repair Cost in Fort Worth?
A typical Electric Gate Repair in Fort Worth runs $185 to $520 depending on the component. Sensor and keypad fixes usually stay under $300. Motor replacements, control board swaps, and commercial operator repairs run higher because the parts themselves are expensive. What moves the price: the brand and age of your opener, whether the repair is mechanical or electronic, and whether we need to order a part or have it on the truck. The best way to avoid overpaying is to get a written quote before work starts, which is exactly what Calder Gate Repair provides. Our estimates are free, they include the diagnostic work, and they state the full price up front. A second opinion quote is useful too, but compare carefully: some lower quotes don’t include the safety sensor recalibration or a full-cycle test, which means the gate fails again in a month.
Our Service Area Near Fort Worth
We cover all of Fort Worth plus the surrounding cities, with regular routes into Electric Gate Repair in North Richland Hills, Electric Gate Repair in Keller, Colleyville, Haltom City, Saginaw, Rendon, Richland Hills, Lake Worth, River Oaks, Sansom Park, and White Settlement. Most service calls in central and north Fort Worth get a same-day or next-day visit. A live person can give you a real arrival window for your specific neighborhood when you call.
Serving Fort Worth, TX - Our Local Coverage Area
We’re based in the Fort Worth area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions About Electric Gate Repair in Fort Worth
Electric Gate Repair is the service of diagnosing and fixing the electrical and mechanical components that move an automatic gate: the motor, control board, sensors, remotes, hinges, tracks, and wiring. In Fort Worth, our repair work covers everything from simple remote reprogramming to full motor and board replacement on residential and commercial gates, and we also provide Electric Gate Repair - Keller area homeowners can count on.
Most repairs take between 60 and 90 minutes on site. Repairs that require a part we don’t carry on the truck add the shipping time for that part, usually one to three business days. We’ll tell you before we start if your repair falls into the second category, and we’ll give you a written price either way.
Most jobs run $185 to $520 before parts, depending on what failed. Sensor, keypad, and remote issues tend to be on the lower end. Motor replacements and control board swaps push the total higher. Call (682) 432-9830 and we’ll walk you through the likely range for your specific opener.
Yes. We service Ghost Controls and Mighty Mule regularly, along with DoorKing, Elite, LiftMaster, FAAC, BFT, Linear, and Viking. We carry common parts for the brands most popular in Fort Worth so we can finish most repairs in a single visit.
A live person answers calls 24/7 and we prioritize gates that are stuck open or stuck closed and posing a security problem. Same-day service is usually available for Fort Worth and the immediate surrounding area. If your gate is stuck closed and your car is trapped inside, tell us when you call and we’ll do everything we can to get out quickly.
Every repair carries the 365-Day Done Right Promise in writing. If the repair fails within 365 days, Calder Gate Repair returns and makes it right at no charge. There’s no deductible, no service fee on the return visit, and no argument about who caused what. It’s in writing on every job.
Clear the area around the gate opener, the track, and the control box so we can access them safely. Have your remotes and any keypad codes ready to test. If the gate is a shared or community gate, let your property manager or HOA know a technician from Calder Gate Repair will be on site.
Schedule Your Electric Gate Repair Service in Fort Worth Today
A live person is ready to take your call at (682) 432-9830. We’ll schedule a visit with a real arrival time, diagnose your gate, and put the price in writing before any work starts. The estimate is free and the 365-Day Done Right Promise backs every repair we do. Call now and get your gate moving again.
Written by Nico Alvarez, Owner at Calder Gate Repair Fort Worth, serving Fort Worth and Tarrant County since 2009.