Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Keller
Electric gate repair in Keller typically costs $185 – $420 for most jobs, and our team reaches most Keller neighborhoods within 60 – 90 minutes. We know exactly what your gate is up against here: expansive clay soil that shifts posts, wind gusts that twist solid steel gates off their hinges, and the occasional lightning strike that takes out a control board without warning. Calder Gate Repair Fort Worth has been fixing these problems across Keller since before smart doorbells were a thing. Call (682) 432-9830 now, and a live person answers. Every visit starts with a written price, so the number you agree to is the number on the invoice.
Why Calder Gate Repair Fort Worth Is Keller’s Preferred Electric Gate Repair Company
Keller homeowners keep our number saved for one reason: we show up when we say we will, and we write down the price before turning a single bolt. Our Electric Gate Repair team is trained on the brands you actually own here. No vague four-hour windows. You get a live, trackable arrival time, the tech arrives in uniform, and you see before-and-after photos of the work. If the repair fails within 365 days, we come back free. That’s the Electric Gate Repair standard, and it’s written into every job we do in Keller. Nico Alvarez leads our crew, and he’s built the team around one principle: a gate that doesn’t close is a security problem, not a convenience issue.
Styles & brands we work with
Electric Gate Motor in Keller
An electric gate motor in Keller works harder than the same motor in most Texas markets. Between the heat, the storms, and the clay movement, motors here burn out capacitors, strip gear teeth, and overheat limit switches years before their rated life. When a Keller gate stops mid-travel or hums without moving, it’s almost always the motor or the capacitor feeding it. Typical repair pricing: $240 – $380 before parts, with motors from Viking, Ghost Controls, and DoorKing in local stock. We quote the full number before work starts.
Motor Replacement vs. Repair
Some motors are worth saving. A capacitor swap or a gear rebuild runs $140 – $260 and often buys another few years. When the motor housing is corroded from humidity or the armature is shorted, replacement runs $425 – $650 installed for most Keller driveway gates.
The Keller-Specific Motor Killer
We see more control board and motor failures in Keller after thunderstorms than any other single cause. A nearby lightning strike doesn’t have to hit your gate. It just has to hit the line. The surge travels, and the first sensitive component to fail is the opener’s brain.
Gate Access Control in Keller
Gate access control in Keller covers keypads, remotes, intercoms, and the safety sensors that stop a closing gate when something is in the way. Homeowners sometimes don’t realize the keypad and the motor are separate systems until the keypad quits and the gate won’t respond. We diagnose and fix keypads, receivers, and sensors, usually for $110 – $240 depending on what failed. If you want a keypad added to an existing opener, that’s $180 – $320 installed and programmed.
Keypad and Remote Sync Problems
The most common call we get in the Villages of Woodland Springs is a keypad that suddenly stopped working. Nine times out of ten the receiver board lost its programming, not the keypad itself. We test both before replacing anything.
Safety Sensor Recalibration After Storms
Hidden Lakes gets hammered by wind, and when a gate gets pushed off-plumb, the safety photocells fall out of alignment. That trips the auto-reverse and the gate won’t stay closed. We realign and test the sensors after every storm-related call, because a misaligned sensor is a danger to kids and pets.
Trusted Brands We Service in Keller
We stock parts for Viking, Ghost Controls, and DoorKing systems because those are the openers we see most on Keller’s custom and semi-custom driveway gates. If you have a Mighty Mule on a ranch gate or a LiftMaster on a slide gate, we handle those too. Calder Gate Repair is factory-familiar with nine major opener brands, and our fix doesn’t void your warranty. For Keller customers, that means a Monday diagnosis is usually a Monday repair, not a week of waiting on a special-order receiver.
See the difference
Before
After
Before
After
Before
AfterCommon Electric Gate Repair Problems We See in Keller Homes
- Wind damage to solid infill gates. A tall, solid steel gate catches wind like a sail. Sixty-mile-per-hour spring gusts bend hinge posts and tear screws straight out of the post. Keller gets those storms every year.
- Clay soil shifting gate posts. Keller’s expansive clay expands when wet and shrinks when dry. That movement slowly tilts gate posts until a swing gate drags its latch side into the concrete.
- Power surge failures from nearby lightning. When lightning hits a transformer or a line nearby, the surge travels. Your opener’s control board and safety sensors are the first components to fry, and it doesn’t matter if you have a surge protector on the house.
- Manual release mechanisms left untested. After an outage, many Keller homeowners discover they never learned how to release the gate manually. We test and show you the release procedure on every storm-related call.
Pricing for Electric Gate Repair in Keller, TX
Here’s what Keller homeowners can expect. Minor repairs like limit switch adjustments or sensor realignment run $95 – $180. Most motor repairs and control board replacements land between $240 – $420 before parts. Full motor replacement with labor is $425 – $650. Gate keypad replacement is $120 – $240. Every job includes diagnostics, and every diagnostic ends with a written price before any work starts. If a post is leaning from clay movement and needs a new footing, that’s a bigger job: $800 – $1,800 depending on depth and whether we reset or replace the post. Call (682) 432-9830 for a free estimate on your specific gate.
We Also Serve Cities Near Keller
Beyond Keller, we regularly run crews into Keller neighboring communities like North Richland Hills, Haltom City, Colleyville, and Fort Worth. If you’re in one of those cities with a storm-damaged gate, the same 60 – 90 minute response window applies.
Serving Keller, TX - Our Local Coverage Area
We’re based in the Keller area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Keller
That’s Keller lean. When the clay soil dries out, it shrinks and pulls away from your gate post’s footing. The post tilts, and the latch side of the gate drops until it scrapes the driveway. You’ll usually see skid marks in the concrete. The fix is resetting the post on a deeper footing or compacting and stabilizing the soil. Call (682) 432-9830 and we’ll tell you which applies to your post.
Locate the manual release, which is usually a small knob or lever on the operator arm. Pull or turn it to disengage the motor, then push the gate by hand. It’s important to re-engage it once power returns. If you’re not sure which is the release, call us and we’ll talk you through it on the phone, 24/7.
Yes. Strong winds can twist the gate enough to shear the solar panel mounting screws, crack the panel frame, and disconnect the charge controller. If the panel was hit by hail, you may be running on a damaged battery that no longer holds a charge. We inspect the panel, charge controller, and battery as one system.
The control board almost always goes first. It’s the most delicate component. Then the safety sensors, then sometimes the motor capacitor. In Keller, this is the single most common repair we make after severe thunderstorms. We replace and test each component in order so you don’t pay for parts you didn’t need.
Look for fresh skid marks in the driveway at the latch side, a widening gap at the top of the gate hinge, or a gate that suddenly seems to close too fast. Any of those points to a shifting post. The longer it goes unaddressed, the more strain it puts on the hinges and the gate operator. Call (682) 432-9830 for a quote; estimates are free.
Need a real human? Call Calder Gate Repair Fort Worth at (682) 432-9830. We answer live, 24/7. We’ll diagnose over the phone, give you a written price before any work starts, and show up with a trackable arrival time. If the repair fails within 365 days, we return free. That’s not a maybe. It’s in writing.
Written by Nico Alvarez, Owner at Calder Gate Repair Fort Worth, serving Keller and the surrounding area in the Dallas-Fort Worth metro since 2009.