Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterLock Repair in Fort Worth, TX
Gate lock repair in Fort Worth typically runs $120 to $285 for most mechanical and solenoid fixes, and we complete the majority of lock repairs the same day we arrive. A broken gate lock isn’t just an inconvenience; it’s a security gap that leaves your home, pets, and property vulnerable. Calder Gate Repair Fort Worth fixes locks on every major gate opener brand, backs the work with our 365-Day Done Right Promise, and gives you a written price before we touch a single component.
We’re the dedicated gate repair shop inside the Relay Home Co. family, and we’ve been handling Fort Worth gate hardware since 2009. If your keypad code stopped working, the key turns but the gate won’t open, or the lock makes a grinding sound before refusing to budge, call us at (682) 432-9830 and a live person will answer, 24/7. This page covers what lock repair actually involves, what it costs in Fort Worth, and how we do it differently. For a full picture of the services we offer, see our Gate Repair overview page.
When You Need Lock Repair
Gate locks fail in predictable ways. Here’s what Fort Worth homeowners call us about most often:
- The key turns but nothing happens. The lock cylinder spins freely or the internal cam that pulls the latch has snapped. We see this regularly on DoorKing and Elite swing gates that are five or more years old.
- The keypad accepts the code but the gate stays locked. That’s usually the solenoid, the small electric pin that pulls back when voltage hits it. It’s a $90 to $160 part-and-labor fix on most systems.
- The lock buzzes or clicks repeatedly. On Ghost Controls and Mighty Mule slide gates, this often means the limit switch is telling the board the gate hasn’t fully closed, so the lock keeps cycling. The lock itself may be fine; the switch is the liar.
- You can push the gate open even when it’s locked. The latch post or strike plate has shifted, often because Fort Worth clay soil expanded and moved the gate slab. We re-align the post and shim the strike, and the lock grabs properly again.
- Water got inside the lock housing after a storm. North Texas downpours and humidity cause corrosion inside lock bodies and connector terminals. That’s a strip, clean, and reseal job, and we recommend a dielectric grease application on the contacts while we’re in there.
- The gate locks fine but the remote won’t release it. This points to a receiver or control board problem rather than the lock itself, but it requires a lock diagnosis to rule out wiring or solenoid failure before we touch the board.
Our Lock Repair Process
You get a live, trackable arrival time before we show up, and we follow the same sequence on every lock repair call in Fort Worth:
- Diagnostic call. You call (682) 432-9830, a real person answers, and we ask six or seven questions about the symptom, your gate type, and the opener brand. That lets us stock the likely parts before we leave the shop.
- On-site inspection. A background-checked, uniformed technician arrives when we said they would, with a live arrival time you can track on your phone. We check the lock body, wiring, keypad, limit switch, and strike alignment.
- Written quote. Before any work begins, you get a written price. That number is what you pay, period, no surprise at the door.
- The repair. We replace the failed part, clean corroded contacts, adjust alignment, and test the lock through ten full open-close cycles with the gate connected to the opener, not just bench-tested.
- Documentation and guarantee. You get before-and-after photos and a digital invoice you pay from a link. Every repair includes a written guarantee and a free second visit if the lock fails within 365 days, per our 365-Day Done Right Promise.
Lock Repair Pricing in Fort Worth
Most lock repairs on Fort Worth residential gates land between $120 and $285 before parts. The lock assembly itself, when replacement is needed, adds $45 to $220 depending on brand and gate type. Here’s a realistic breakdown:
- Solenoid replacement: $90 – $160 total (part and labor), common on Ghost Controls and Mighty Mule swing gates.
- Lock cylinder replacement: $100 – $180 total, shared-key and keypad-integrated variants both included in that range.
- Strike plate realignment and shimming: $80 – $140, most often needed after soil movement around the gate post.
- Full lock assembly replacement on a slide gate: $180 – $320 total, varies by whether the gate is a DoorKing, Elite, or aftermarket retrofit lock.
- Water damage cleanup and terminal re-seal: $70 – $120, done as part of any repair where we find corrosion.
What moves the price? Gate type matters more than brand. Slide gate locks and lock boxes sit lower and take more water and grit, so they tend to fail harder and cost more to replace. Swing gate locks are simpler, but alignment on a heavy steel gate takes more time. If the lock problem is actually a board or receiver issue, that’s a different repair category-sometimes resolved through Automatic Gate Repair-and we’ll tell you that before any work begins, with the new price in writing.
For an exact quote on your gate, call (682) 432-9830 and ask for Nico. Estimates are free, and we’ll tell you over the phone whether you’re looking at a repair call or something simpler.
Best Locks for Fort Worth Gates
Fort Worth’s freeze-thaw cycles and summer humidity punish gate locks. In neighborhoods like Ridgelea, Arlington Heights, and Summer Creek, we recommend direct-bury rated wiring connections and a lock body with a sealed solenoid rather than an exposed one. For Mighty Mule swing gates, the solenoid-actuated latch holds up better than the magnetic version. On Ghost Controls and Elite slide gates, we steer customers toward stainless lock assemblies with weep holes so condensation drains instead of pooling in the housing. When rust has already set in, Weld & Rust Repair may be needed first.
If you’re in a gate that already has a working opener but a dead lock, replacing the lock is almost always cheaper than replacing the whole operator. We’ll tell you that flat, because that’s what we’d want for our own gate.
Why Calder Gate Repair Fort Worth for Lock Work
Lock repair is where many gate companies lose the diagnostic thread. They replace the lock, the gate still doesn’t open, and the customer pays twice. We don’t work that way. We treat the lock, the opener, and the limit switches as one system, checking for underlying Gate Realignment issues, and we diagnose the whole circuit before we sell you a part. That’s why the diagnostic call matters and why we hear lock symptoms accurately from the first phone call.
We’re also the only gate shop we know of in Fort Worth that pairs a written price with a free return visit if the repair doesn’t hold for 365 days. The 365-Day Done Right Promise is printed on every invoice, and it covers lock repairs the same as opener repairs.
Since 2009, Calder Gate Repair has been part of the Relay Home Co. network, independently owned and operated with the Relay Visibility Guarantee behind every job. That means a live arrival time on your phone, before-and-after photos, and an invoice link you can pay in thirty seconds without hunting for a checkbook.
Lock Brands We Service
Our technicians train on the lock hardware and openers from nine major brands, so we see the failure patterns before we arrive. On Ghost Controls systems, we look for solenoid wiring chafe at the hinge. On DoorKing slide gates, we check the limit cam alignment at the lock position. On Elite and Mighty Mule gates, we test the receiver signal path to confirm the unlock command is reaching the board. That brand-specific knowledge means we carry the right repair parts and don’t patch a lock with a generic part that fails in six months.
FAQs – Lock Repair
How much does gate lock repair cost in Fort Worth?
Gate lock repair in Fort Worth typically costs $120 to $285 for labor-inclusive mechanical or solenoid repairs, with full lock assembly replacements running up to $320 on slide gates. Parts run $45 to $220 depending on brand. Call (682) 432-9830 for a free estimate on your specific gate, and you’ll get a written price before any work starts.
Can you repair a gate lock the same day in Fort Worth?
Yes, we complete most lock repairs the same day we arrive, and we schedule same-day visits across Fort Worth, including Wedgwood, Lake Worth, and the Near Southside. Call early and a live person will give you a real arrival window, not a four-hour range.
Is it cheaper to repair or replace a gate lock?
Repair is cheaper in almost every case: a solenoid or cylinder repair runs $90 to $180, while a full lock replacement typically runs $180 to $320. We’ll always quote you the repair price first and move to replacement only if the lock body is physically broken or corroded through.
What causes a gate lock to stop working after heavy rain?
Heavy rain in Fort Worth seeps into low-mounted lock housings and corrodes solenoid terminals or fills the lock with grit. We fix this by stripping the lock, cleaning contacts, applying dielectric grease, and resealing the housing, a repair that runs $70 to $120 as part of any lock service.
Can you fix a gate lock if I don’t know the brand of my opener?
Yes, and we’ll identify the brand during the diagnostic call by asking what the gate looks like and whether you have a keypad, remote, or intercom. If you can’t identify it, we’ll pinpoint it on site. Call (682) 432-9830 and describe the gate, and we’ll walk you through it in two minutes.
Call Calder Gate Repair Fort Worth for Lock Repair
If your gate lock is stuck, buzzing, or ignoring your code, call (682) 432-9830 right now and you’ll reach a live person, not a menu. We’ll quote a free estimate, schedule a same-day visit, and send a background-checked technician with a trackable arrival time. Every lock repair includes a written price, a written 365-Day Done Right Promise, and a free second visit if the repair fails within a year. That’s how Gate Repair in Fort Worth should work, and it’s how we’ve done it since 2009.
Written by Nico Alvarez, Owner at Calder Gate Repair Fort Worth, serving Fort Worth.