Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterWeld & Rust Repair in Fort Worth, TX
Weld and rust repair on a Fort Worth gate typically costs $180 to $450 for common fixes like re-welding a cracked hinge or treating surface rust, while full frame restoration on larger driveway gates can run $600 to $1,400 depending on how far the rot has spread. Calder Gate Repair Fort Worth handles everything from our Gate Repair services for small crack repairs to structural rebuilds, and we’ll give you a written price before any torch gets lit. If your gate sags, flakes, or shows rust bleed-through on the hinges, call (682) 432-9830 and we’ll tell you straight what it needs.
This is the work that keeps a gate standing when Texas weather tries to take it down. Fort Worth’s humidity swings and summer heat cycles are hard on welded steel, especially inside tube frames where moisture collects and rusts from the inside out. We see it constantly in neighborhoods like Fairmount, Ryan Place, and Ridglea Hills, where ornamental iron gates from the 1990s and early 2000s are hitting the age where factory welds start to fail. Our Gate Repair in Fort Worth team works on these every week, and weld work is one of the highest-demand fixes we do.
Calder is part of the Relay Home Co. family, established in 2009, and we’re the dedicated gate repair arm of that network. That means our technicians provide Automatic Gate Repair, weld, grind, and rust-treat gates every day, not as a side job off a handyman truck. We carry the full 365-Day Done Right Promise on every repair: if a weld cracks or rust returns within a year, we come back at no charge and make it right.
When You Need Weld & Rust Repair
Not every gate problem is obvious from ten feet away. The signs below are what we tell Fort Worth homeowners to look for before small rust spots become structural failures:
- Sagging gate that drags on the driveway. A gate that scrapes the concrete usually means a hinge weld has stretched or cracked. In Fort Worth’s clay soil, gate posts also shift with seasonal moisture swings, which puts extra stress on hinge welds. If your gate leaves a fresh scratch mark every time it opens, the hinge needs attention.
- Rust bleeding through paint or powder coat. Orange staining at joints, bottom rails, or around bolt holes is rust working from inside the metal. Once you see bleed-through, the surface rust has been building underneath for months. Waiting doesn’t stop it, it just spreads.
- Cracked welds on hinge plates or frame corners. Walk around your gate and look at where the hinge plates meet the frame. Hairline cracks there grow fast once they start, especially on heavier gates with Ghost Controls or DoorKing openers pulling and pushing the frame daily.
- Flaking metal at the bottom rail. The bottom horizontal rail of a steel gate sits closest to sprinkler overspray and standing water after storms. Pitting and flaking there is common on Fort Worth gates, and it’s the number one spot we cut out and re-weld before the frame loses integrity.
- Gate shakes or rattles when the opener runs. Loose frame welds amplify vibration from the opener motor. If your Mighty Mule or Elite opener sounds louder than it used to and the gate shudders mid-travel, loose or cracked weld points are often the culprit.
- You bought the house and the gate came with rust. Fort Worth home inspections in older neighborhoods like Mistletoe Heights and Berkeley Place frequently flag gate rust as a repair item. We do these pre-closing fixes and post-move-in cleanups regularly, and we document everything with before-and-after photos.
If any of these sound familiar, the fix is usually faster and cheaper than most people expect. Call (682) 432-9830 and describe what you’re seeing; we’ll give you a likely range over the phone and a firm written price once a technician looks at it in person.
Our Weld & Rust Repair Process
We follow the same steps whether it’s a small gate in a single-family driveway or a long double gate on a corner lot in Arlington Heights. The process, including any needed Gate Realignment, is built around the Relay Standard: a live arrival time you can track, before-and-after photos, and a digital invoice you pay from a link.
- Inspection and written quote. A background-checked, uniformed technician arrives at the scheduled time and checks every weld point, hinge, and section of the frame. You get a written price before any work starts. The number on that quote is the number on the invoice, not a starting point for haggling.
- Surface prep and rust removal. We grind or wire-wheel rusted areas back to clean, solid metal. For tube frames with internal rust, we assess whether the section needs cutting out and replacing or whether treating the exterior is sufficient. No filler over weak metal; if the steel is compromised, it comes out.
- Welding and fabrication. Cracked welds are ground out and re-welded with proper penetration, not just glazed over. When a section of rail or a hinge plate needs replacement, we cut in new steel matched to the gate’s existing dimensions and profile. We weld gates for every opener type, including heavier models from Ghost Controls and DoorKing.
- Rust treatment and coating. After welding, we treat the repaired area with a rust-inhibiting primer and apply a matching finish coat. For gates with widespread surface rust, we’ll talk through full repaint options. The goal is that you can’t point to where the repair happened six months later.
- Refit, alignment, and opener check. Once the frame is solid, we re-hang the gate, check hinge alignment, and run the opener through full open and close cycles. A weld repair that throws the gate out of alignment just creates new stress points, so we test under load, not just by eye.
- Photos, invoice, and guarantee. You get before-and-after photos of the work, a digital invoice paid by link, and your 365-Day Done Right Promise in writing. If the repair fails within that year, the return visit costs you nothing.
Weld & Rust Repair Pricing in Fort Worth
Most weld and rust repair jobs in Fort Worth land between $180 and $450 for spot repairs. Here’s the breakdown by what we typically see across Tarrant County:
| Repair Type | Typical Price Range | Notes |
|---|---|---|
| Single cracked weld re-weld | $180 – $300 | Includes grinding, welding, and finishing the repaired point |
| Hinge plate repair or replacement | $250 – $450 | Price depends on gate weight and whether the post itself is damaged |
| Bottom rail rust cut-out and patch | $300 – $600 | Includes sectioning out rotted steel and welding in new stock |
| Surface rust treatment on one gate | $150 – $350 | Full prep, rust-inhibiting treatment, and primer |
| Full frame restoration on large driveway gate | $600 – $1,400 | Multiple weld repairs, rust treatment, and repaint |
What moves the price is the extent of the rust, not the size of the job. A small gate with rust through two frame tubes costs more than a large gate with a single cracked hinge, because the work is in the cutting, fitting, and welding time. Gate material matters too: ornamental steel and wrought iron are straightforward, while thin-wall aluminum requires a different welding approach and sometimes a specialist alloy.
Every estimate is free. Call (682) 432-9830 and we’ll talk through what you have, what it likely needs, and what the written quote will cover before any work begins.
FAQs – Weld & Rust Repair
Can you fix a rusted gate without replacing the whole thing?
Yes, in most cases. If the rust is surface-level or confined to one section of frame rail, we grind it back to clean metal, treat it, and coat it. If a section is rusted through, we cut out that section and weld in new steel. Full replacement is only necessary when multiple frame tubes have lost structural strength across the entire gate. Call (682) 432-9830 for an inspection and we’ll tell you which category yours falls into.
How long does a weld repair last on a Fort Worth gate?
A properly executed weld repair on clean, prepared steel should last the life of the gate, not just a season. The weak point shifts to the surrounding metal, which is why we inspect adjacent welds during every repair. With the 365-Day Done Right Promise, if the weld we made fails within that window, we return and fix it at no charge.
Do you need to remove the gate to weld it?
Sometimes, but not always. Small section repairs and hinge re-welds can often be done with the gate in place, supported and clamped to prevent movement during welding. Larger repairs where a section of frame rail needs replacement typically require removing the gate and laying it flat for clean cuts and proper fit-up. We’ll tell you in the written quote if removal is involved and what it adds to the price.
Is it cheaper to repair or replace a rusted gate?
Repair is almost always cheaper, usually by a factor of three to five. A full replacement of a standard double driveway gate in Fort Worth runs $2,500 to $6,000 or more when you factor in fabrication, hanging, and opener re-installation. Weld and rust repair on the same gate typically comes in under $1,000. We’ll give you honest numbers for both options so you can decide without pressure. Call (682) 432-9830 for a free estimate on either path.
Can you match the paint or finish after a weld repair?
We can match most standard black, bronze, and gray gate finishes closely enough that the repair blends in from normal viewing distance. For gates with custom or weathered finishes, we’ll discuss a full repaint of the gate or a touch-up approach before work begins. The goal is that the repair area doesn’t announce itself every time you pull into the driveway.
Call Calder Gate Repair Fort Worth for Weld & Rust Repair
If your gate is cracking, sagging, or showing rust at the joints, get it looked at before a small weld issue becomes a gate on the ground. Calder Gate Repair Fort Worth gives you a written price before any work starts, a live arrival time you can track, and the 365-Day Done Right Promise on every weld and rust repair we do. Our phone is answered by a real person around the clock, and the technician who comes to your door is background-checked and in uniform.
Call (682) 432-9830 today for your free estimate. We’ll schedule the visit, inspect the gate, and hand you a number in writing before the first weld.
Written by Nico Alvarez, Owner at Calder Gate Repair Fort Worth, serving Fort Worth.