Gate Repair in Rendon - Same-Day Repair, Priced Before We Start

Fast, Reliable Gate Repair Across Rendon

Gate repair in Rendon usually means one thing before anything else: the clay moved. Most jobs we run in this part of North Texas start with re-leveling a binding gate, not swapping a board. If your gate drags, sags, or won’t latch after rain, a Calder technician can typically reach your property the same day and put a written price in your hand before any work begins. Call us at (682) 432-9830 for a free estimate. We’re the dedicated Gate Repair team inside the Relay Home Co. family, and we dispatch from the Dallas-Fort Worth office straight to Rendon driveways.

Call (682) 432-9830

Why Calder Gate Repair Fort Worth Is Rendon’s Preferred Gate Repair Company

Rendon isn’t a suburb of copy-paste houses on postage-stamp lots. Most properties along Rendon Road, FM 1187, and the side streets off Shelby Road sit on one to five acres, which changes how gates fail and how they get fixed. A sagging 14-foot steel tube gate hung on a wooden post is a completely different repair than a lightweight HOA aluminum gate. Our techs know that before they even pull up the drive.

The Relay Visibility Guarantee runs through every job we book here. You get a live arrival time you can track, a background-checked uniformed technician, and before-and-after photos on a digital invoice you pay from a link. Nico Alvarez, who runs Calder Gate Repair Fort Worth, set the standard: if we can’t say exactly when we’ll be there and exactly what it costs, we don’t book it.

That’s the whole point of this page: to show you what gate repair looks like when your posts sit in swelling clay, not HOA-standard aluminum. Around here, the first tool out of the truck isn’t a screwdriver. It’s a hydraulic jack, because after a wet spring the ground heaves and binds steel against the latch post. We expect that in Rendon, so we’re ready for it.

Wrought Iron Gate Repair in Rendon

Wrought iron gate repair here usually targets two things: hinge posts that lean after a clay swell, and latch hardware that no longer lines up because the ground moved underneath it. Rendon homeowners with custom welded or ornamental iron gates call us when the gate starts scraping the driveway or won’t close far enough to catch the latch. We reset posts with fresh concrete where the footing has cracked, straighten bent uprights, and realign the gate so it swings true again. Most wrought iron repairs in this part of Rendon run $240 to $560 depending on how far out of plumb the post has drifted and whether we need to weld a cracked joint.

The fix often includes grinding out rust blooms at the bottom rail where sprinkler overspray and clay splash-back eat the finish. We prime and paint those spots rather than leaving bare metal to rust again in one season.

Post Resets on Expansive Clay

When a wet spring in Rendon swells the clay, a heavy iron gate can push its hinge post sideways in a matter of weeks. We dig out around the concrete footing, re-plumb the post, and pour new concrete with a wider base so it resists the next swell. Then we re-hang the gate and adjust the latch so it closes clean.

Rust Repair and Reinforcement

Bottom rails and latch stiles take the worst of it. We cut out weakened sections, weld in matching stock, and match the paint as closely as the existing finish allows. The gate ends up stronger than it was before the rust took hold.

Metal Gate Repair in Rendon

Metal gate repair in Rendon frequently means rescuing heavy custom steel gates that were never properly supported for this soil. A 16-foot ranch gate welded from 2-inch steel tube is a lot of weight for a creosote post that’s been in the ground since 1985. When the post rots or splits, the gate sags, drags, and eventually refuses to open at all. We replace the post with a steel schedule-40 post set in a proper concrete footing, re-hang the gate, and correct the sag with turnbuckles where the frame allows. Expect $320 to $680 for this kind of job depending on gate weight and access.

Slide gates on metal tracks have their own set of problems around here. Gravel washes onto the track after storms, and the wheels grind through it until the gate bounces or binds. We clear the track, check the wheels and bearings, and set the gate level again so the motor stops working harder than it has to.

Heavy Steel Gates on Wooden Posts

Wooden posts and heavy steel gates are a bad long-term pairing in Rendon clay. Our techs saw it recently on a 3-acre tract off Rendon Road: a custom welded gate had pulled its hinge post out of plumb after the ground swelled. We reset the post in concrete, corrected the sag, aligned the rack and pinion, then recalibrated the FAAC operator. The gate swings like it’s new.

Track Cleaning and Roller Repair

Gravel driveways in Rendon shed material onto slide gate tracks all year. We pull the gate back, clear the track, replace worn rollers, and adjust the guide wheels. It’s a maintenance item most homeowners never think about until the gate stops halfway.

Trusted Brands We Service in Rendon

Most Rendon properties run one of a handful of opener brands, and we’re factory-familiar with all of the common ones: FAAC, BFT, LiftMaster, Linear, Viking, DoorKing, Elite, Ghost Controls, and Mighty Mule. When a DoorKing control board fails after a storm surge or a Ghost Controls arm loses its limit setting, we know the programming sequence without flipping through a manual in your driveway. We also see a lot of solar-powered Mighty Mule setups on the larger properties where running conduit to the gate would cost more than the opener itself. Calder stocks common boards, remotes, and safety edge parts for fast turnaround so you’re not waiting a week for a part to ship.

Common Gate Repair Problems We See in Rendon Homes

• Binding after rain. Expansive clay along Rendon’s creek beds swells after a wet spring and pushes the latch post into the gate. Our techs carry a hydraulic jack to re-level the gate before touching the opener.
• Cooked circuit boards. Summer heat over 100°F bakes the plastic housing on opener control boards and shortens their life. We see DoorKing and FAAC boards fail faster here than in cooler parts of the metro.
• Rotted wooden posts. Long gravel driveways with heavy custom gates often hang on posts that were never meant to carry that weight. Eventually the post splits, the gate sags, and the opener strips its own gears.
• Storm surge damage. Lightning and power surges during storm season hit gate operators without surge protection. Most control boards don’t survive a direct hit; a $60 surge protector saves a $300 board.

Pricing for Gate Repair in Rendon, TX

We Also Serve Cities Near Rendon

Calder Gate Repair Fort Worth runs crews out to Rendon regularly, and we cover the surrounding area including Fort Worth, North Richland Hills, Keller, and Colleyville. If you’re just outside the Rendon line or have a rental property in one of those cities, call the same number: (682) 432-9830.

FAQs About Gate Repair in Rendon