Gate Installation Cost - Honest Price Ranges, Free Written Quote

Wrought iron

Wood & steel frame

Farm & ranch

Sliding driveway gates

LiftMaster operators

Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Explore

Styles & brands we work with

01Wrought iron02Wood & steel frame03Farm & ranch04Sliding driveway gates05LiftMaster operators

Before & after

See the difference

Recent ProjectFull RestorationComplete Upgrade

BeforeAfter

BeforeAfter

BeforeAfter

How Much Does Gate Installation Cost in Fort Worth?

Gate installation in Fort Worth typically runs between $1,850 and $7,500 for most residential properties in 2026. A basic single-swing driveway gate with a quality opener lands around $2,800 to $4,200 installed, while estate-style double gates with automation, intercom, and custom metalwork can reach $12,000 or more. The final number depends on gate size, material, opener brand, and the amount of site prep your property needs.

At Calder Gate Repair Fort Worth, every installation starts with a written price before any work begins. No surprises at the door, no vague estimates. Call (682) 432-9830 and we’ll walk you through realistic numbers for your specific situation.

Key Takeaways

• Most Fort Worth homeowners pay $2,800 to $4,200 for a single-swing driveway gate with automation
• Steel gates with powder-coat finish cost more upfront but last 15 – 20 years in North Texas weather
• Opener brand matters: LiftMaster and FAAC parts are stocked locally, keeping repair costs down later
• The 365-Day Done Right Promise applies to every installation: if something fails within a year, we return at no charge
• Free estimates are standard. Call (682) 432-9830 and get a written number, not a ballpark

Gate Installation Cost Breakdown (2026)

Here’s what gate installation actually costs in the Fort Worth market, line by line. These numbers reflect what Calder Gate Repair and other local installers quote as of 2026.

• Single-swing driveway gate, steel, 10 – 12 ft: $1,200 – $2,800 (gate only, no opener)
• Aluminum single gate, 10 – 12 ft: $1,500 – $3,200 (lighter, rust-resistant)
• Double-swing driveway gate, steel, 14 – 16 ft: $2,400 – $5,500 (gate pair only)
• Gate opener, sliding or swing: $800 – $1,900 (brand and horsepower dependent)
• Gate opener, heavy-duty commercial style: $1,800 – $3,500 (for oversized or high-cycle gates)
• Installation labor, standard single gate: $500 – $1,100 (site-dependent)
• Installation labor, double gate or sloped site: $900 – $1,800 (concrete work, leveling add cost)
• Intercom or keypad entry system: $250 – $800 installed
• Vehicle exit sensor (loop detector): $300 – $700 (cuts through concrete, ties into opener)
• Concrete pad or post-setting foundation: $200 – $800 per post (Fort Worth clay soil requires deeper footings)
• Permit fees (City of Fort Worth): $50 – $180 for residential gate work when required

What pushes the number up or down in Fort Worth specifically? Two things stand out. First, the soil. Large swaths of Fort Worth sit on expansive clay that shifts with moisture. That means fence and gate posts need concrete footings dug at least 18 – 24 inches deep, sometimes deeper in areas like Wedgwood or around Benbrook Lake where the clay gets especially reactive. Shallow posts mean a gate that sags within two years. Second, the heat. Powder-coat finishes run about $300 – $600 extra per gate, but they’re worth every dollar on a west-facing gate in July. A raw steel gate without proper coating will show rust streaks within 18 months in this climate.

What Affects Gate Installation Pricing in Fort Worth

• Gate width and weight. A 10-foot single gate costs hundreds less than a 16-foot double gate. But weight matters more than width: solid steel gates weigh enough that you’ll step up to a higher-horsepower opener, which adds $300 – $600.
• Opener brand. Calder Gate Repair installs and services nine major brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. LiftMaster and FAAC tend to run mid-range and have the best parts availability in Fort Worth. Ghost Controls is a solid budget pick. Viking and DoorKing lean commercial and cost more. The brand choice changes not just upfront price but long-term repair costs.
• Site prep and slope. A flat driveway in a neighborhood like Ryan Place is straightforward. A sloped lot in the Ridglea Hills area means the gate either needs to be hung with extra clearance or you need a sliding gate instead of a swing gate. Sliding gates run $400 – $1,000 more in hardware and track work.
• Material choice. Steel is the most common in Fort Worth for strength and security. Aluminum costs about 20 – 30% more but resists rust indefinitely. Wood gates (usually cedar or treated pine) start cheaper at $800 – $1,500 but require sealing every 1 – 2 years and warp in the humidity swings we get from spring through early fall.
• Access and existing infrastructure. If your driveway already has a gate post foundation from a previous gate, you save on concrete work. If we’re pulling wire for an intercom and installing a loop detector in a newly poured driveway, that adds both time and material. In neighborhoods like Fairmount or Mistletoe Heights with older driveways, the concrete cutting for loop sensors often requires a saw with a water feed, which increases the line item.
• Permit requirements. The City of Fort Worth requires permits for most gate installations when they involve new electrical runs or drive approach changes. Some HOA communities, especially gated neighborhoods like those along the Chisholm Trail Parkway corridor, also have architectural review processes. The permit itself is modest, but the approval timeline can add weeks.

Common Gate Installation Scenarios in Fort Worth (With Real Numbers)

Here are four scenarios we see regularly at Calder Gate Repair Fort Worth, so you can match your situation to a realistic price.

Scenario 1: Standard single-swing driveway gate with opener

A 12-foot steel gate with powder-coat finish, a LiftMaster swing opener, one keypad, and standard installation on flat ground. Total: $3,400 – $4,600. This covers most single-family homes in neighborhoods like Meadowbrook, Wedgwood, and parts of the Near Southside.

Scenario 2: Double-swing estate gate with intercom

Two 8-foot steel gates, a FAAC or LiftMaster heavy-duty opener, intercom with remote release, and concrete footings for both posts. Total: $6,000 – $9,500. Expect the higher end if the gate has decorative scrollwork or custom dimensions. Homes in areas like Mira Vista or along the Trinity Trails often choose this configuration.

Scenario 3: Sliding gate for a sloped or limited-space driveway

A single sliding steel gate, track system, DoorKing or Viking opener, and loop detector for vehicle exit. Total: $4,800 – $7,800. The track and roller hardware add $600 – $1,200 over a comparable swing gate.

Scenario 4: Gate replacement using existing posts

If your posts are solid and level (common when the old gate was hung well), you might only need a new gate panel and opener. Total: $1,800 – $3,000 for a single gate, $3,500 – $5,000 for a double. We inspect the posts before recommending this route; in Fort Worth’s clay soil, failed posts that look fine at ground level often need re-pouring once excavated.

Gate Installation vs. Gate Repair: When to Replace Instead

Sometimes the smarter money goes into repair. If your existing gate is structurally sound but the opener has failed, a repair typically runs $180 – $450 for common issues like limit switch failures, receiver board problems, or track misalignment. That compares very favorably to a full replacement at $2,800 and up. Calder Gate Repair always gives you both numbers before you decide. Our Gate Installation in Fort Worth page covers the full installation process, or start with our home page to see the entire service range.

Here’s a practical rule of thumb for Fort Worth specifically: if the gate post is still solid and the gate panel isn’t rusted through or sagging more than an inch, repair is usually the better call. If the post has shifted or the gate makes a grinding sound when opening, replacement parts plus labor can approach 50 – 60% of new installation cost, and at that point you’re often better off starting fresh with a warranty that covers the entire system.

How to Save on Gate Installation

Saving money on a gate installation isn’t about finding the cheapest installer. It’s about making choices that lower your total cost of ownership over 10 – 15 years. Here’s what actually works:

• Choose an opener brand with local parts support. LiftMaster and FAAC have deep distribution in the Dallas-Fort Worth metro. That means if something fails in year three, the part arrives fast and the repair is cheaper. Obscure brands can mean 5 – 7 day waits and higher part prices.
• Get multiple written estimates. This is the single best move. Ask each installer for a line-item written price. Calder Gate Repair provides this automatically: a written price before any work starts, on every job, with no exceptions. If another quote comes in lower, ask them to match line items, not just the bottom number.
• Consider a standard-size gate instead of custom. A 12-foot single gateway costs far less than a 15.5-foot custom panel. If your opening can accommodate a standard size, you’ll save $500 – $1,500 on fabrication.
• Plan your electrical during construction, not after. If you’re already pouring a driveway or adding a patio, run conduit for gate wiring at the same time. Retrofitting conduit after concrete is cured adds $200 – $600 in saw work.
• Get the powder-coat finish now, not later. It adds cost upfront but eliminates re-painting every 2 – 3 years. In Fort Worth’s sun and humidity, a good powder coat lasts 15 – 20 years.
• Use the 365-Day Done Right Promise as your insurance policy. Every installation from Calder Gate Repair carries a written guarantee. If the work isn’t right within 365 days, we return at no charge. That’s a free second visit if something fails, stated in writing, not as a courtesy but as a commitment.

The fastest way to get an accurate number is a free estimate. Call (682) 432-9830 and we’ll schedule a site visit, measure the opening, check the soil conditions, and give you a written price on the spot.

Fort Worth Gate Installation: What the Process Looks Like

Here’s the step-by-step sequence we follow on every installation. If you’re comparing estimates, ask whether the other installer does the same. This list is your checklist.

1. Site visit and measurement. We measure the gate opening, check the driveway slope, inspect existing posts or foundations, and identify where the opener and electrical will be installed. This happens before any price is quoted.
2. Written estimate. You get a line-item price covering the gate, opener, post work, electrical rough-in, and any sensors or keypads. The number is written and binding. No change at the door.
3. Material selection and ordering. We confirm gate material (steel, aluminum, wood), finish (powder-coat color, stain, or paint), and opener brand. Standard gates typically arrive within 1 – 2 weeks; custom fabrication runs 3 – 5 weeks.
4. Post setting and concrete work. We dig footings to the depth required for Fort Worth soil (typically 18 – 24 inches, sometimes deeper in problem areas), set the posts, and let the concrete cure properly. Rushing this step is how gates end up sagging.
5. Gate hang and opener installation. The gate panel goes on, the opener is mounted, and all wiring is routed through conduit. We install your keypad, intercom, or vehicle sensor at this stage.
6. Programming and safety testing. This is where we set the force limits, travel stops, and safety reversal. Gates are heavy, and an improperly adjusted opener is dangerous. We test the full cycle at least ten times and confirm the auto-reverse works correctly before we call the job done.
7. Walkthrough and paperwork. You get a demonstration of every feature, before-and-after photos via the Relay Standard, a digital invoice you can pay from a link, and your written warranty documentation.

Technicians arrive in uniform with a live, trackable arrival time. You won’t sit through a four-hour window wondering where your installer is. We’re background-checked, trained on all nine major opener brands, and dispatched from the Relay Home Co. family, which has been operating since 2009.

What Brand Should You Choose for Your Fort Worth Gate?

The opener is the part that fails most often. Choosing the right brand matters as much as choosing the right gate. Here’s how the major brands break down for Fort Worth homeowners in practical terms.

• LiftMaster: The default choice for most residential installations. Widely available parts, strong reliability, and easy integration with home security systems. Most installations we quote land in the $900 – $1,500 range for the opener alone.
• FAAC: Italian engineering, built for high-cycle use. If your gate opens ten or more times a day or you’re running a small business, FAAC is worth the premium. Expect $1,200 – $1,900 for the opener.
• Ghost Controls: A solid budget option for single-swing gates. Good feature set for the price, run $700 – $1,100. We see more Ghost Controls units on rural properties around the Fort Worth outskirts.
• BFT and Linear: Mid-range options that work well for most applications. Parts are generally available in DFW, though not as universally stocked as LiftMaster.
• Mighty Mule: Common on DIY installations. We service them often, but if you’re doing a professional installation, we usually recommend stepping up to LiftMaster or FAAC for durability.
• Viking and DoorKing: Commercial-grade units used on large estate gates, equestrian properties, and business entrances. Heavier duty, longer lifespan, higher price: $1,800 – $3,500 installed at the opener line.
• Elite: Less common in Fort Worth but a workhorse when it’s already installed. If your existing gate has an Elite opener, we’re familiar with the platform and can service or repair it without hesitation.

Calder Gate Repair is factory-familiar with all nine of these brands. That means when you call with a problem, you’re not getting a technician who has to Google your opener’s wiring diagram on the drive over. We know the equipment before we arrive.

Gate Installation Timelines in Fort Worth

How long should you expect to wait? Standard installations with stock gates typically complete in 1 – 3 days of on-site work once materials arrive. Custom fabrication extends the total timeline to 4 – 6 weeks from order to completion. The concrete curing period accounts for part of the wait: posts set in fresh concrete need roughly 48 – 72 hours before the gate is hung, and longer if the weather is wet. Fort Worth’s spring thunderstorm season (March – May) can add a few days to any outdoor concrete work.

If you’re replacing an existing gate and the posts are reusable, we can often complete the job in a single day. Call (682) 432-9830 with your gate’s dimensions and we’ll give you a realistic timeline along with the price.

FAQs – Gate Installation Cost

Is it cheaper to repair a gate or replace it in Fort Worth?

Gate repair in Fort Worth typically runs $180 – $450 for common opener issues and $300 – $800 for structural fixes like sagging gates or bent hinges. Full replacement starts at $1,850. If your gate post is solid and the panel isn’t rusted through, repair usually makes financial sense. If you’re spending more than 50 – 60% of replacement cost on repairs, consider replacing instead. Call (682) 432-9830 and we’ll give you both numbers in writing.

How much does a driveway gate opener cost by itself?

Gate openers in Fort Worth run $800 – $1,900 for residential swing or slide models, depending on the brand. Ghost Controls starts lower, LiftMaster and FAAC sit in the middle, and Viking or DoorKing heavy-duty units run higher. Installation adds $300 – $600 in labor for most single-gate setups. The 365-Day Done Right Promise covers every opener we install.

What’s the most expensive part of a gate installation?

The gate panel itself is usually the largest single line item at $1,200 – $5,500 depending on size, material, and finish. For double gates, the cost of two panels plus the heavy-duty opener can reach $8,000 – $12,000 all-in. Custom ironwork, decorative elements, and intercom systems each add $300 – $1,500 to the total.

Can you install a gate on a sloped driveway?

Yes, and it’s common in Fort Worth’s hillier neighborhoods. For most slopes under 10 – 12 degrees, a swing gate can be hung with extra bottom clearance (usually $200 – $400 in additional labor). Steeper slopes require a sliding gate, which adds $600 – $1,200 for the track, rollers, and related hardware. Sliding gates also require more side clearance, typically 1.5 times the gate width.

Does a gate installation require a permit in Fort Worth?

Yes, most gate installations involving new electrical work or changes to the driveway approach require a City of Fort Worth permit costing $50 – $180. HOAs in gated communities may have additional approval requirements. Calder Gate Repair handles the paperwork for permitted work as part of the installation.

Do you charge for estimates?

No. Calder Gate Repair Fort Worth provides free estimates. A background-checked technician visits your property, measures the opening, and gives you a written price before any work starts. Call (682) 432-9830 to schedule.

What’s the 365-Day Done Right Promise?

The 365-Day Done Right Promise is a written guarantee on every installation and repair. If the work isn’t right within 365 days, Calder Gate Repair returns at no charge. It includes a free second visit if the repair fails. This is not an optional add-on; it’s on every job we do, stated in writing, no exceptions.

Pricing reflects the Fort Worth market as of 2026. Calder Gate Repair Fort Worth offers free estimates – call (682) 432-9830.

Written by Nico Alvarez, Owner at Calder Gate Repair Fort Worth, serving Fort Worth since the company’s founding within the Relay Home Co. family.