Gate Access Control Cost - Honest Price Ranges, Free Written Quote

How Much Does Gate Access Control Cost in Fort Worth?

Gate access control installation in Fort Worth typically runs $2,800 to $8,500 for a complete system on a single gate, including hardware, keypad or intercom, and professional wiring. Repairs to existing systems are far less: most service calls land between $175 and $450, with common fixes like replacing a limit switch or keypad running under $300. For a slide gate opener with phone-based access control, expect the higher end of that range, while a simple keypad retrofit on a swing gate often comes in under $2,000.

Key Takeaways

• Full gate access control installation: $2,800 – $8,500 in Fort Worth
• Common repairs (limit switches, keypads, receivers): $175 – $450
• New opener with access control: $1,800 – $5,500 depending on brand and gate type
• Fort Worth’s clay soil and summer heat drive extra costs for concrete pads and weather-rated components
• Calder Gate Repair provides a written price before any work starts, plus a 365-Day Done Right Promise on every repair

Gate Access Control Cost Breakdown (2026)

Here’s what you’re actually paying for when you install or upgrade gate access control in Fort Worth. These numbers reflect what we see across Tarrant County in 2026, from Arlington Heights to Benbrook to Saginaw.

Component or Service	Typical Fort Worth Price Range	Notes
Keypad access system (standalone)	$400 – $950 installed	Hardwired models cost less; wireless runs higher
Telephone entry / intercom system	$1,200 – $3,000 installed	Includes wiring runs and mounting
Smartphone app-based access (add-on)	$250 – $650	Retrofit module for existing opener, brand-dependent
Complete access control package (slide gate)	$4,500 – $8,500	Opener, keypad, vehicle sensor, warning lights
Complete access control package (swing gate)	$2,800 – $6,000	Single leaf; double leaf adds $800 – $1,500
Limit switch replacement	$175 – $300	Common on LiftMaster and Linear openers
Keypad replacement or reprogram	$150 – $325	Includes service call and setup
Receiver / antenna replacement	$195 – $375	Fixes remote range issues
Full opener replacement with access control	$1,800 – $5,500	Brand, gate weight, and opener type drive range

What pushes a job toward the top of these ranges? A heavy steel slide gate on a long driveway will need a bigger opener, which costs more. So will a gate that’s seen years of Fort Worth sun and needs new wiring run through existing conduit. What brings the price down? A swing gate with clean existing wiring and a homeowner who already has a working opener, where we’re only adding a keypad or upgrading to a smartphone module.

If you’re comparing brands, expect LiftMaster and FAAC residential models to land mid-to-upper range, Mighty Mule and Ghost Controls on the lower end, and commercial-grade DoorKing, BFT, and Viking systems to start around $3,500 installed regardless of gate type.

What Affects Gate Access Control Pricing in Fort Worth

• Gate type and weight: A 900-pound iron swing gate needs a beefier opener than a lightweight tube-steel gate. Heavier gates mean bigger motors, which means higher cost. In older neighborhoods like Ryan Place or Oakhurst, those 1950s-era custom iron gates are beautiful but heavy, and they demand commercial-rated openers even for residential use.
• Power availability: Many Fort Worth homes have gates installed 100 feet or more from the nearest outlet. If there’s no conduit already run, trenching and running power adds $500 to $1,500. Rocky soil in areas west of Loop 820 can make trenching slower and more expensive.
• Existing opener brand and condition: If you have a working Linear or Elite opener, adding access control is usually a straightforward retrofit. If the opener is 15 years old and the control board is fried, you’re looking at replacement rather than an add-on.
• Access method you choose: A basic 12-button keypad is the cheapest entry point. Telephone entry systems that call a landline or cell phone cost more. App-based systems with live video (like those integrated with LiftMaster’s MyQ or Ghost Controls’ app) sit in the middle, but require decent Wi-Fi at the gate, which sometimes means adding a range extender.
• Fort Worth heat and weather exposure: Gates in full sun on the west side of Fort Worth take brutal afternoon heat from June through September. We recommend weather-rated enclosures and quality wiring rated for our temperature swings. Cheap keypads crack and fade within two summers here. Good components cost more up front and last twice as long.
• Permit and HOA requirements: Some HOAs in areas like Walsh, Mira Vista, or Montserrat have specific requirements for gate appearance and access control systems. If your HOA requires a particular intercom style or mandates that the gate match a certain aesthetic, that can add to the materials bill.

Common Gate Access Control Repairs and What They Cost

Not every access control problem means a full replacement. Here’s what we see most often in Fort Worth, and what it costs to fix.

Limit Switch Failure

A limit switch is the small sensor that tells the gate when to stop moving. When it fails, the gate might not close fully, or worse, it keeps trying to push past the closed position. On a hot July afternoon in Keller or North Richland Hills, old limit switches fail regularly from thermal fatigue. Replacement: $175 – $300 including the service call. Most limit switch repairs take under an hour.

Keypad Dead or Unresponsive

Texas heat, rain, and the occasional ice storm we get in January and February take a toll on keypads mounted outside. If the keypad is completely dead, we first check the wiring and the control board before swapping the unit. Keypad replacement: $150 – $325. If the wiring itself is shot, add $100 – $250 for the rewiring.

Remote Control Won’t Open the Gate

Sometimes it’s a dead battery in the remote. Other times the receiver on the opener has failed, or the antenna has come loose. We test the receiver output with a multimeter before replacing anything. Receiver/antenna replacement: $195 – $375. Reprogramming existing remotes is usually included.

Telephone Entry or Intercom Not Ringing

Phone-line intercoms are still common in Fort Worth, especially in older gated communities and homes with long driveways. When the intercom stops ringing, it’s often the phone line itself (AT&T or Spectrum territory, depending on your neighborhood), but it can also be a bad relay on the intercom board. Diagnosis: $95 – $150. Board replacement: $300 – $700 depending on the system.

Gate Opens Partially Then Stops

This is often a failing capacitor in the opener motor or an obstruction sensor misaligned. In spring, Fort Worth’s high pollen and dust can coat the safety sensors on a gate, causing false stops. Capacitor replacement: $125 – $250. Sensor alignment or cleaning: $75 – $150.

Can You Install Gate Access Control Yourself?

You can, and plenty of Fort Worth homeowners do, especially with DIY-friendly brands like Mighty Mule and Ghost Controls. A basic keypad kit runs $150 – $400 at Home Depot or Lowe’s. But here’s what the box doesn’t tell you.

Gate openers and access control systems run on 12V or 24V DC power, and they involve components that can pinch, crush, or entrap. A gate opener motor can deliver enough force to seriously injure a person or pet if safety sensors aren’t installed and wired correctly. That’s not a scare tactic. That’s the reality of a moving gate weighing several hundred pounds.

We regularly get called to fix DIY installs where the wiring was reversed, the safety loop wasn’t installed, or the gate wasn’t balanced before the opener went on. What would have been a $400 professional install becomes a $900 repair because the control board fried from a short.

The other issue is programming. Multi-code receivers, rolling-code security, and app integration sound simple until you’re standing in your driveway holding a manual that reads like it was translated from Korean by someone who’s never seen a gate. A technician who works on LiftMaster, FAAC, Linear, Viking, DoorKing, Elite, BFT, Mighty Mule, and Ghost Controls every week can do in 90 minutes what takes a homeowner a full Saturday, and the wiring will be correct the first time.

How to Save on Gate Access Control in Fort Worth

Cost control starts with knowing what you actually need. A simple keypad that opens your existing single swing gate is a very different budget than a full telephone entry system with video and a vehicle exit loop.

1. Get a written diagnostic first. Don’t replace a $700 control board when the problem is a $25 pressure sensor. Calder Gate Repair charges a flat diagnostic fee that’s applied to the repair. The technician tells you what’s wrong, what it costs to fix, and gives you the number in writing before any work begins.
2. Retrofit before you replace. If your opener is less than 10 years old and the motor runs quietly, adding a keypad or smartphone module to the existing unit is almost always cheaper than a new opener. We’ll tell you if your opener is a good retrofit candidate.
3. Choose the right opener before you buy. If you’re starting from scratch, don’t overbuy. A single lightweight swing gate doesn’t need a commercial DoorKing operator. But don’t underbuy either. An undersized opener on a heavy Fort Worth iron gate will burn out the motor in three years. We’ll help you match the opener to the gate, not to the price tag.
4. Fix small problems early. A clicking sound, a gate that pauses, a remote that works only at close range. These are early warning signs. Catching a failing capacitor at $200 is a lot cheaper than replacing a burned-out motor at $900. The same logic applies to the access control system itself: a corroded wire at the keypad is a $150 fix today and a $500 rewiring job next year.
5. Call for a free estimate. Calder Gate Repair Fort Worth gives free estimates. Call (682) 432-9830 and we’ll give you a real dollar range for your specific gate and setup before anyone steps foot on your property. No vague “it depends” without numbers. You’ll know what to expect.

How the Calder Gate Repair Process Works

We don’t do four-hour arrival windows. When you call (682) 432-9830, a live person answers, 24/7. You’ll get a trackable arrival time for a background-checked, uniformed technician. That’s the Relay Standard, the booking-to-invoice experience that comes from our Relay Home Co. roots, which go back to 2009.

At the gate, the technician diagnoses the problem, explains what’s wrong in plain English, and writes down the exact price before any tool comes out. You approve the number, the work happens, and you get before-and-after photos plus a digital invoice you can pay from a link. No paper chase. No surprise charges.

Every repair carries the 365-Day Done Right Promise: if the repair fails within 365 days, Calder returns at no charge. That’s a written guarantee on every job, not a verbal “trust us.” If it’s not done right, we make it right. The second visit is free.

Gate Access Control Brands We Service in Fort Worth

We repair and install access control systems on nine major opener brands. That covers virtually every gate opener a Fort Worth homeowner is likely to own, regardless of which side of town you’re on.

• LiftMaster – The most common residential brand in Fort Worth. We stock common LiftMaster parts on the truck.
• FAAC – Popular in European-style gates and a lot of the custom iron work we see in Westover Hills and Rivercrest.
• BFT – Common in newer subdivisions with developer-installed gates.
• Linear – Found on many apartment and HOA gates throughout Tarrant County.
• Viking – Heavier-duty units, often on commercial properties but also on big residential estates.
• Ghost Controls – The DIY favorite, but we repair and reprogram these when the original install goes wrong.
• DoorKing – A staple of older gated communities and ranches around Fort Worth.
• Elite – Common on newer slide gates, especially in Parker County and the far west side.
• Mighty Mule – Farm and ranch gates, plus a lot of acreage properties outside the loop.

If your brand isn’t on that list, call anyway. Access control systems share a lot of common components, and we’ll tell you over the phone whether it’s something we can handle.

Fort Worth Specific Considerations

Fort Worth isn’t Dallas. Our soil is different, our weather is different, and our gates are different. Here’s what that means for your access control budget.

The Clay Soil Problem

Fort Worth sits on expansive clay soil. It swells when wet and shrinks when dry, and it moves. Gate posts set in concrete can shift over time, which pulls the gate out of alignment. An unaligned gate makes the opener work harder, which shortens the motor life and can throw off the access control sensors. When we install access control, we check gate alignment first. If the gate has shifted, adding a keypad to an unaligned gate is wasted money. Fixing post alignment runs $300 – $800, and it’s worth doing before any electronic work.

Summer Heat and Electronics

Fort Worth regularly sees 100-plus degree days in July and August. Electronics inside a metal control box in direct sun can reach 140 degrees or higher. Cheap control boards fail fast in those conditions. We recommend and install components rated for high-temperature operation, and we try to mount control boxes on the north side of the gate or under shade when possible. It’s a small detail that adds years to the life of the system.

Storm and Surge Protection

North Texas thunderstorms are violent. Lightning strikes and power surges are common in the spring and fall. A surge protector on your gate opener and access control system is a $75 – $150 add-on that can save you a $400 control board replacement. If your gate is on a long power run, it’s especially important. We recommend surge protection on every install we do in Fort Worth.

Frequently Asked Questions

How much does gate access control cost in Fort Worth?

Gate access control in Fort Worth costs $2,800 to $8,500 for a complete new system installation, while repairs to existing systems typically run $175 to $450. The specific price depends on your gate type, the access method you choose, and whether you’re retrofitting or starting from scratch. Call (682) 432-9830 for a free estimate with a real dollar range for your setup.

Is it cheaper to repair or replace a gate opener with access control?

Repairing is almost always cheaper. Most access control repairs run $150 to $450, while a full opener replacement with access control starts at $1,800 and goes up from there. If your opener is under 10 years old and the motor is healthy, repair is the right call. If the control board has failed twice in 18 months, replacement starts making financial sense. We’ll tell you which side of that line you’re on.

How much does a keypad gate opener cost in Fort Worth?

A standalone keypad installed on an existing gate opener costs $400 to $950 in Fort Worth, including programming and installation. Wireless keypads come in at the lower end; hardwired units with better weather sealing cost more. If the keypad is part of a full new system, expect it to be included in the package price.

Can you install gate access control the same day?

In most cases, yes. A keypad retrofit or a limit switch replacement can usually be completed the same day you call, assuming we have the part on the truck. Full new installations typically need one to two weeks of lead time for equipment ordering and any trenching work. Call (682) 432-9830 and a live person will tell you whether same-day service is available in your area.

How much does a gate intercom system cost in Fort Worth?

A telephone entry or intercom system for a residential gate in Fort Worth runs $1,200 to $3,000 installed, depending on the wiring distance and the features you need. Basic systems that ring a single phone number are on the lower end. Systems with video, multiple phone numbers, and app integration land higher. We’ll give you a written quote before any work starts.

What does it cost to add smartphone access to my existing gate opener?

Adding smartphone app-based access to an existing opener costs $250 to $650, depending on your opener brand and whether a Wi-Fi range extender is needed at the gate. LiftMaster MyQ modules run on the lower end. Ghost Controls and other brands vary. The module itself is $150 to $350, with installation and programming making up the rest.

Do you charge for estimates?

No. Calder Gate Repair Fort Worth gives free estimates. Call (682) 432-9830, describe your gate and what you’re trying to do, and we’ll give you a real price range before scheduling. If you want an on-site estimate, that’s free too. The price we quote is the price you pay, in writing, before any work begins.

Get a Free Estimate for Gate Access Control in Fort Worth

If you’re tired of guessing what gate access control should cost, call (682) 432-9830. You’ll talk to a live person, not a voicemail. We’ll ask about your gate, your opener, and what you want the access system to do. Then we’ll give you a real dollar range, not a vague “it depends.”

Calder Gate Repair Fort Worth is the dedicated gate repair specialist inside the Relay Home Co. family, which has been doing this since 2009. We repair and install access control on Gate Access Control in Fort Worth systems across nine major brands, and every job comes with a written price, a written guarantee, and the 365-Day Done Right Promise. If the repair fails within a year, we come back free.

Whether your gate is in Arlington Heights, Fairmount, Wedgwood, or out past Benbrook, we’ve got a technician who knows your neighborhood and your gate. Check out our home page for more on how we work. Then call us. The estimate is free, and you’ll know exactly what you’re paying before a single bolt is turned.

Written by Nico Alvarez, Owner at Calder Gate Repair Fort Worth, serving Fort Worth since 2009.

Pricing reflects the Fort Worth market as of 2026. Calder Gate Repair Fort Worth offers free estimates – call (682) 432-9830.