Ghost Controls Keypad & Intercom Repair Nationwide

Ghost Controls Keypad & Intercom Repair: The Fort Worth Owner’s Guide

Ghost Controls keypad and intercom repair in Fort Worth typically runs $185 to $420 installed, with most jobs completed same day. The price depends on whether you need a keypad swap, an intercom module replacement, or wiring repair between the unit and your gate opener board. Most Fort Worth homeowners discover the failure the hard way: the keypad goes dead, entry codes stop working, or the intercom crackles and drops audio when a delivery driver presses the call button.

Call (682) 432-9830

We’re Calder Gate Repair Fort Worth, and we work on Ghost Controls systems every week. This page tells you exactly what fails, what it costs, and whether you should call us or grab a screwdriver. No fluff, no vague estimates, just the straight answer. Nico Alvarez owns the Fort Worth location, and his rule for every Ghost Controls job is simple: quote the price before we touch anything, and back the repair in writing.

Which Ghost Controls Models This Applies To

Ghost Controls builds opener systems under three main series lines: the residential G-Series (single and dual gate setups), the wireless accessory line, and the newer AXDP and HYDP hybrid solar models. Keypads and intercoms from Ghost Controls are not universal across every series. A keypad made for a G-Series opener will not always communicate with an older Solar Gate kit without the right receiver module in the opener board.

Here’s the compatibility gotcha Fort Worth owners run into most: Ghost Controls changed keypad frequency matching on select models after 2019. If your opener board label shows “GCS-2.0” or older, an off-the-shelf Ghost Controls keypad may pair but drop connection intermittently. The fix is usually a small receiver firmware flash or switching to the older OEM part number, both of which we handle at the bench. We also stock quality aftermarket keypads that ship with dual-frequency chips, solving the handshake problem without a full board replacement.

The intercom side is simpler. Ghost Controls intercom modules sit inline with your existing call wiring, and most failures are weather-seal failures, not electronics failures. We carry OEM intercom modules plus a solid aftermarket line from a Texas-based supplier that holds up better in Fort Worth’s July humidity and sudden spring downpours.

Signs Your Ghost Controls Keypad or Intercom Is Failing

• Keypad is completely dark, no backlight. This usually points to a failed power feed or a dead keypad board. The keypad itself is inexpensive; the cost is diagnosing whether the wiring run to the opener took the hit too.
• Codes work sometimes, not every time. Intermittent response almost always comes down to a corroded connection at the opener board or a keypad membrane that’s worn through from years of Texas sun and rain. The button presses aren’t registering the full signal.
• Intercom buzzes or hums constantly. A steady hum with no button press usually means a short in the intercom wiring or a failing power transformer feeding the intercom station. It gets louder when the gate motor cycles, which is a dead giveaway.
• Hear audio but can’t talk back. If you can hear the visitor but they can’t hear you, the intercom’s talk-back circuit has failed. This is a common weak point on Ghost Controls intercom modules after three to five years outdoors.
• After a power outage, nothing works. Ghost Controls boards are sensitive to surge events. If the keypad and intercom both died after a storm, the opener board may have taken a surge through the accessory circuit. We see this after June thunderstorm season in Fort Worth.

Replacement Cost and What’s Included

Most Ghost Controls keypad replacements in Fort Worth run $185 to $320 installed. Intercom module replacement typically lands between $240 and $420, depending on whether the wiring run needs to be pulled fresh. If we’re replacing both a keypad and intercom at the same property, expect the combined job to fall between $390 and $560, and we often shave a little off labor when we’re already on site doing both.

These numbers are not guesses. Here’s the breakdown we give every Fort Worth homeowner before we start:

• Diagnostic time: $49 flat, which we credit toward the repair if you approve the work
• Ghost Controls keypad part: $65 to $145, depending on OEM vs. aftermarket and series compatibility
• Ghost Controls intercom module part: $110 to $230
• Labor for keypad or intercom swap: $95 to $175, including wiring verification and programming

Every Calder Gate Repair Fort Worth quote is written down before we turn a screw. The number we agree on is the number on the invoice. If the repair fails within 365 days, we return at no charge under our 365-Day Done Right Promise. That’s it. No subtext, no surprise line items.

DIY or Call Us?

You can safely do a few checks yourself. Confirm the keypad has power. Look for water inside the housing. Make sure the wiring at the base hasn’t been chewed by rodents or cut by a trimmer. Those are visual checks anyone can do. If the keypad is dead after you’ve confirmed power and clean terminals, you’re done with the DIY stage. The rest needs a multimeter and access to the opener board, and opening that panel means working near live low-voltage and, on some models, a charged capacitor.

One honest safety note: Ghost Controls openers are driven by a sealed battery or capacitor system on the motor side. Even with the power off, stored DC can deliver a shock if you bridge the wrong contacts. We’ve seen well-meaning Fort Worth homeowners short a board trying to test a keypad, and now the repair costs twice as much. If the keypad checks out visually but still won’t respond, call us at (682) 432-9830. Tell me what it’s doing – or not doing – and I’ll tell you exactly what it needs.

FAQs