Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Lake Worth
Electric gate repair in Lake Worth, TX typically costs $180 – $340 for most opener and board repairs, and we can usually have a technician at your property the same day you call. Storm damage repairs, slide gate track realignments, and commercial operator overhauls run higher because they involve more labor and heavier components. If your gate is stuck, grinding, or refusing to close after the last thunderstorm, call Calder Gate Repair Fort Worth at (682) 432-9830. We answer live, 24/7, and we’ll give you a written price before any work starts.
Lake Worth homeowners deal with something most Fort Worth neighborhoods don’t: gate systems built on shifting clay soil, exposed to open western Tarrant County wind, often sitting on former ranchland with long driveways and oversized setbacks. That combination beats up slide gates, bends hinge posts, and cooks opener electronics. We know these failure patterns because we see them every week from Lake Worth to Keller. The fix usually starts with diagnosing what the soil, wind, or lightning actually did, not just swapping a part and hoping.
Why Calder Gate Repair Fort Worth Is Lake Worth’s Preferred Electric Gate Repair Company
Our Electric Gate Repair team is part of the Relay Home Co. family, founded in 2009. Each location is independently owned and operated, and ours is led by Nico Alvarez. That means every Lake Worth job carries three non-negotiables: a written price before any work starts, a written guarantee on every repair, and a free second visit if the repair fails within our 365-Day Done Right Promise window. We don’t offer those as add-ons. They’re built into every invoice.
We dispatch background-checked, uniformed technicians with a live, trackable arrival time, not a four-hour window. When your gate is stuck open at 9 PM and your dogs are eyeing the street, that matters. You’ll see who’s coming, when they’ll arrive, and what the job will cost before a single bolt is turned. That’s the Relay Standard, and Lake Worth customers hold us to it.
Scheduling for Lake Worth runs through our Dallas-Fort Worth metro office, with crews deployed locally across the area. Most residential service calls in Lake Worth are reached within 60 – 90 minutes during normal hours. Storm-related surges can push that out, but you’ll always know exactly when we’re arriving.
Styles & brands we work with
Commercial Gate Operator in Lake Worth
Commercial gate operator repair in Lake Worth means restoring a motorized operator, drive chain, or control board that powers a heavy slide or swing gate at a business, church, storage facility, or ranch entrance. These units run far more cycles per day than residential openers, and when one fails, it’s not just an inconvenience. It means employees can’t get in, deliveries stall, and security is compromised. Most commercial operator repairs in Lake Worth run $350 – $900 depending on whether we’re replacing a circuit board, drive belt, chain, or the entire operator head. We quote the full number before any work starts.
Operator replacement and retrofit
When a commercial operator is beyond repair, we replace it with a new unit matched to the gate’s weight, cycle rate, and power availability. Lake Worth has plenty of older commercial properties with operators that predate modern safety standards. A retrofit includes new photo eyes, safety edges, and a compliant control board. Expect $1,200 – $2,800 for a full replacement, installed and programmed.
Access control integration
Many Lake Worth businesses pair their gate operator with a keypad, card reader, or phone-based entry system. When the operator fails, the access system often needs reprogramming afterward. We handle the full stack: operator repair, keypad syncing, remote enrollment, and safety loop testing. We’re factory-familiar with DoorKing and Viking commercial operators, two of the most common brands on Lake Worth commercial properties.
Automatic Gate Repair in Lake Worth
Automatic gate repair in Lake Worth covers the residential side: opener motors, control boards, remote controls, keypads, safety sensors, and drive components on gates that open with a click or a code. Most automatic gate opener repairs in Lake Worth run $180 – $340 before parts, with full opener replacements landing in the $700 – $1,500 range depending on the brand and gate type. Wind-battered hinges, clay-shifted tracks, and sun-baked control boards drive most of the calls we field out here.
Board and motor diagnosis
When your gate stops responding to remotes, the problem is usually a control board, a limit switch (the small sensor that tells the gate when to stop), or the motor capacitor. We bench-test boards on site and replace what’s failed. More importantly, we figure out why it failed. In Lake Worth, it’s often a power surge from a spring storm. We’ll recommend a surge protector if that’s the culprit.
Track and hinge realignment
Clay soil doesn’t just crack slabs. It pushes gate posts out of plumb, which throws slide gate tracks out of alignment. The gate starts binding, grinding, or jumping teeth. We reset posts where possible, shim and re-secure tracks, and reprogram travel limits so the opener isn’t fighting a misaligned gate. You’d be surprised how often a “dead opener” is actually just a gate the motor can no longer move.
Trusted Brands We Service in Lake Worth
We’re factory-familiar with nine major gate opener brands, and in Lake Worth we most commonly service Mighty Mule, Ghost Controls, and Elite on residential gates, plus DoorKing on commercial properties. That matters because each brand has its own programming quirks and failure patterns. We stock common boards, remotes, and safety components for these brands, which means faster turnaround when a Lake Worth gate goes down. A Mighty Mule that won’t respond to its remote usually needs a new logic board. A Ghost Controls gate that opens but won’t close usually has a misaligned safety sensor. We know the difference before we even arrive.
Common Electric Gate Repair Problems We See in Lake Worth Homes
- Wind-damaged hinge posts and cracked welds. Lake Worth sits open to western Tarrant County wind, and solid infill gates act like sails. Older ornamental gates near the lake take the worst of it. We re-plumb posts, repair or replace hinges, and re-weld cracked joints where needed.
- Clay soil heaving and track misalignment. Expansive clay swells after heavy rain, pushing post footings out of line. Slide gates bind on their tracks. We reset footings, realign racks, and reprogram travel limits. This is the most preventable recurring failure we see, and it’s almost never fixed by simply tightening bolts.
- Lightning-fried control boards. Spring thunderstorms bring lightning strikes and power surges that take out gate opener circuit boards and loop detectors. If your gate worked before the storm and now shows no lights, you’re probably looking at a surge-damaged board. We replace the board and recommend a whole-gate surge protector for the next season.
- Sun-damaged opener electronics. Lake Worth summers are brutal on gate electronics. Intense heat cooks capacitors and degrades wiring insulation inside opener enclosures. We see more board failures in August than any other month. A shaded enclosure or upgraded ventilation often doubles board life.
See the difference
Before
After
Before
After
Before
AfterPricing for Electric Gate Repair in Lake Worth, TX
Here’s what Lake Worth homeowners can expect to pay, in real numbers. Residential opener and control board repairs run $180 – $340 on average. Full automatic gate opener replacements fall between $700 – $1,500 branded on the unit and gate type. Commercial operator repairs run $350 – $900, with full replacements at $1,200 – $2,800. Slide gate track realignments from clay heave typically run $250 – $450. The biggest cost drivers are gate weight, opener brand, and whether post footings need resetting. We give you a written price before any work starts, and the number on your invoice is the number you agreed to up front. No surprises. Call (682) 432-9830 for a free estimate tailored to your gate.
We Also Serve Cities Near Lake Worth
Our team covers Electric Gate Repair in Lake Worth and the surrounding Tarrant County communities, including Fort Worth, North Richland Hills, Keller, and Colleyville. Same coordinated scheduling, same written-price guarantee, same live person answering the phone. If you’re just outside Lake Worth, give us a call and we’ll get you on the schedule.
Serving Lake Worth, TX - Our Local Coverage Area
We’re based in the Lake Worth area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Lake Worth
Every automatic gate has a manual release mechanism, usually a keyed release or pull lever on the operator itself. On most residential openers, you’ll find a release cord or keyed cylinder near the top of the motor housing. Turn the key or pull the lever to disengage the motor from the drive, then push the gate by hand. If your gate has a magnetic lock or solenoid lock, you’ll need to release that separately. We always demonstrate the manual release procedure after every install or major repair. If you’ve lost your release key, call us at (682) 432-9830 and we’ll get you sorted.
Heavy rain saturates the expansive clay soil around your gate posts, and that clay swells. The swelling pushes your post footings upward and sideways, which throws the track out of alignment. Your slide gate then binds, skips teeth on the rack, or jumps the track entirely. A proper fix means resetting the footing, not just pushing the gate back on. We dig down, test the footing’s plumb, reset it in compacted base, then realign the track and reprogram travel limits. Half-measures just invite the same failure after the next storm. Call (682) 432-9830 to have us look at it.
Yes. The older sections near Lake Worth have custom ornamental gates built decades ago, and many of their hinges and latch components are no longer manufactured. We fabricate replacement parts on-site when necessary. Our fabricator carries stock steel and can match existing profiles closely enough that the repair disappears into the original design. We recently repaired a slide gate on a ranch-style property in that older section. The rack and pinion had jumped teeth after a severe thunderstorm, and saturated clay under the post footing had heaved the concrete, pulling the gate out of line. Our crew reset the footing, repositioned the rack, and reprogrammed the LiftMaster operator’s travel limits. The gate runs smoothly now. If your ornamental gate is damaged, call us. Chances are we can save it.
The best protection is a properly sized panel paired with a quality charge controller, plus mechanical hardening of the gate itself. Lake Worth’s intense sun degrades wiring and capacitors inside opener enclosures, so we recommend installing the control board in a shaded enclosure or adding a small ventilation fan. For wind, ensure your gate’s hinges and posts are plumb and tight. A gate that rattles in the wind puts constant stress on the opener’s drive train. We also recommend a surge protector on the panel side, since a nearby lightning strike can travel through the solar array and fry the board. We can evaluate your current solar setup during any Electric Gate Repair visit and make upgrades that extend equipment life.
Automatic gates are required to have entrapment protection: at minimum, a safety device that reverses the gate if it encounters an obstruction, plus photo eyes or contact edges. The specific requirements depend on the gate type, location, and installation date. Many older gates in Lake Worth were installed before current standards and don’t meet them. We check this during every automatic gate repair. If your gate lacks proper safety edges or photo eyes, we’ll quote the retrofit as part of the written estimate. It’s a safety issue, not an upsell. Call (682) 432-9830 to have us assess yours.
Call Calder Gate Repair Fort Worth for Electric Gate Repair in Lake Worth
If your gate is down, stuck, or acting up after the last storm, call us at (682) 432-9830. You’ll get a live person, a real arrival time you can track, and a written price before any work starts. We’re led by Nico Alvarez, and every repair carries the 365-Day Done Right Promise: if the repair fails within 365 days, we return at no charge. Free estimates, background-checked technicians, and no surprises on the invoice. That’s how we work in Lake Worth.
Written by Nico Alvarez, Owner at Calder Gate Repair Fort Worth, serving Lake Worth and the surrounding Tarrant County area.