Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in White Settlement, TX
Calder Gate Repair is the gate company White Settlement homeowners call when a welded pipe gate finally sags past saving or an opener quits on a Monday morning. Most gate opener repairs in White Settlement run $225 – $385 before parts, and we give you that number in writing before any work starts. What makes jobs here different comes down to the homes themselves: mid-century ranch houses on roomy lots, with gates that were often hand-built and retrofitted over decades, not pulled from a box. Call (682) 432-9830 and a live person answers, any hour.
Why White Settlement Homes Are Different
White Settlement’s housing stock is mostly single-story brick ranch homes from the 1950s through the 70s. Many properties still have the original wood or chain-link backyard access gates, and a surprising number are welded from oilfield pipe, a nod to the area’s roughneck heritage. That pipe is tough. The posts holding it, often less so.
The local climate does real work on gates here. Hot, humid summers make metal expand and sag. Severe storms with hail and high winds knock things out of alignment. And the clay soil beneath White Settlement shifts with moisture, which slowly pushes posts out of plumb. A gate that closed cleanly in May can drag by August because the ground moved half an inch. We see it constantly. Older gates also tend to be a patchwork of non-standard hinges, tracks, and improvised fixes. They’re rarely a straight swap. That is exactly why a written price before the work starts matters here, you are not paying for surprises buried inside forty years of previous repairs.
Styles & brands we work with
Our Main White Settlement Services
White Settlement homeowners call on us most for two things: gates that won’t open or close properly, and the opener systems that run them. Here’s how each works locally.
Gate Repair in White Settlement
This covers the physical gate: sagging, dragging, rusted posts, broken hinges, cracked welds, and gates that have dropped so far the latch no longer lines up. In White Settlement, we regularly find steel pipe gates that outlasted their posts. The gate itself is fine, but the post has rusted at ground level and started leaning. We straighten, reinforce, or replace the post first, then re-hang the gate so it swings true. Full details on how we approach these repairs are on our Gate Repair in White Settlement page.
Electric Gate Repair in White Settlement
Electric gate systems in White Settlement deal with heat, humidity, and storms, all of which shorten the life of control boards, capacitors, and wiring connections. We trace the problem from the keypad or remote all the way to the motor, then quote the fix before touching a wire. Because many of these systems were added to older gates years after the home was built, wiring runs are often exposed or run through conduit that has cracked. See the Electric Gate Repair in White Settlement page for how we diagnose and repair these systems.
Gate Opener Repair in White Settlement
The opener is the motor and control unit that moves the gate. Common failures in White Settlement include burned circuit boards after summer storms, stripped gears in older units, and limit switches that no longer tell the gate where to stop. When a limit switch fails, the gate may slam or reverse mid-travel, both hard on the hardware. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Get specifics on Gate Opener Repair in White Settlement.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in White Settlement
We’re factory-familiar with nine major opener brands, and in White Settlement we most often see Linear, Viking, and Ghost Controls on residential gates, with DoorKing on a few older estate properties. Common replacement parts for these units ship quickly, and our techs carry the most-used boards and sensors. For a full rundown, see our brands.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in White Settlement, TX
| Service | Typical range in White Settlement |
|---|---|
| Gate opener repair | $225 – $385 |
| Major opener component (control board, motor, gear) | $275 – $545 |
| Electric gate repair | $225 – $485 |
| Driveway gate opener repair | $225 – $445 |
| Swing gate opener repair | $225 – $415 |
| Sliding gate opener repair | $250 – $395 |
| Gate opener motor replacement | $350 – $1,500 |
| Gate operator repair | $225 – $485 |
What pushes a White Settlement job toward the top of those ranges is usually the gate itself: a welded pipe gate that has to be re-hung on new posts costs more than a lightweight chain-link panel. We quote the full price in writing before any work begins, and the number on the invoice matches the number you approved at the door.
Neighborhoods We Serve in White Settlement
We work across all of White Settlement, from the original mid-century blocks near Cherry Lane to the neighborhoods around White Settlement Road and the newer streets west of Loop 820. Our techs typically reach most White Settlement homes within a few hours of your call, and same-day service is available when the schedule allows.
- Central White Settlement
- Neighborhoods along Cherry Lane
- Streets west of Loop 820
- Homes near Saddle Hills Park
- Areas off White Settlement Road
Service Area – Cities Near White Settlement
Calder Gate Repair is headquartered in Fort Worth and dispatches techs to White Settlement every day. If you have family or a rental property in a nearby city, we cover Fort Worth, TX, North Richland Hills, TX, Keller, TX, and Colleyville, TX as well. Same direct pricing, same written guarantees.
Serving White Settlement, TX - Our Local Coverage Area
We’re based in the White Settlement area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in White Settlement
Most White Settlement calls are reached within a few hours, and same-day service is available when the schedule allows. Emergency gate failures, like a gate stuck open overnight, get priority routing. Call (682) 432-9830 and we’ll give you a live arrival time you can track.
Most repairs, like re-hanging a sagging gate or replacing an opener, do not require a permit. New gate installations can, depending on the property. If you have an HOA, check the covenants first, but we can talk through what the job involves before you file anything.
Yes. If you’re under contract on one of the older ranch homes here and the gate looks questionable, we’ll come out, check the posts, hinges, opener, and wiring, and tell you what’s solid and what’s likely to need work within a year or two. Written estimate included.
If your gate is dragging, sagging, or refusing to open, call Calder Gate Repair at (682) 432-9830. You’ll get a real person, a clear diagnosis, and a written price before anything is touched. That’s how we work in White Settlement.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What White Settlement Customers Say
"Slide gate wheels replaced. Glides smoothly now."
- Mark T."Booked online. The tech texted his ETA and arrived on time. Gate opener was dead; he replaced the control board and tested the sensors."
- Terry W."Safety sensors realigned. Works fine. Photo eyes were dirty and out of line. Gate now stops when it should."
- Raul A.