Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Richland Hills, TX
Calder Gate Repair handles automatic and manual gate work throughout Richland Hills, where mid-century ranch lots and newer gated subdivisions sit on clay-heavy soil that moves with every wet-dry season. That soil movement is the single biggest reason gates in this city bind, sag, and burn out opener motors faster than homeowners expect. If your gate is dragging, grinding, or refusing to close, call (682) 432-9830 and we’ll send a background-checked technician with a live arrival time you can track from your phone.
Why Richland Hills Homes Are Different
Richland Hills is mostly 1950s to 1970s single-family ranch homes on generous lots, with custom builds and gated entries filling in over the last couple of decades. The original gates are ornamental steel or wood, and many were retrofitted with automated openers long after the posts were set. That matters because the posts were rarely engineered for opener torque. East of Rufe Snow Drive especially, we see original wrought-iron gates mounted straight into limestone outcroppings or old concrete curbs. Those footings often lack reinforcement, so a modern opener’s repeated force slowly works the post loose. The fix is usually core drilling a new footing and re-setting the post, not just tightening a hinge.
Add North Texas heat and the occasional freeze-thaw cycle, and the expansive clay under Richland Hills swells and shrinks enough to knock gate posts a half-inch out of plumb in a single season. Gears strip, circuit boards overheat, and limit switches (the small sensors that tell the gate when to stop) drift out of adjustment. We plan for all of it on every Richland Hills job because we see it weekly.
Styles & brands we work with
Our Main Richland Hills Services
Most Richland Hills calls fall into three camps: a gate that won’t open or close, an electric system that’s tripping or dead, and an opener motor that runs but won’t move the gate. Each has its own page with full pricing and repair detail.
Gate Repair in Richland Hills
A sagging or dragging gate in Richland Hills is almost always a post or hinge problem before it’s an opener problem. We re-set posts that clay soil has shifted, weld broken steel, replace rotted wood framing, and bring the gate back to square so the opener isn’t fighting extra weight every cycle. On older ranch properties, the hinge posts are often original to the house, which means the fix needs a footing, not just a bigger bolt. Full details, including what we charge for common repairs, are on the Gate Repair in Richland Hills page.
Electric Gate Repair in Richland Hills
Electric gates in Richland Hills take a beating from heat and soil movement. Wires pull loose at the hinge, underground conduit cracks as the ground shifts, and transformer or control-board failures show up as a gate that’s completely dead or trips the breaker every time. We trace the entire low-voltage run, replace damaged cable, and get the system back to working order. The Electric Gate Repair in Richland Hills page breaks down the common failures and what they cost to fix.
Gate Opener Repair in Richland Hills
When the opener motor hums but the gate doesn’t move, or the gate reverses halfway, the problem is usually a stripped gear, a failed capacitor, or a limit switch out of adjustment. Clay-related gate drag accelerates all three. We carry parts for LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, so most opener repairs in Richland Hills are done in one visit. See the Gate Opener Repair in Richland Hills page for pricing by symptom and brand.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Richland Hills
We’re factory-familiar with nine leading opener brands, including Viking, Ghost Controls, DoorKing, and Elite. Common gears, capacitors, limit switches, and control boards are stocked on our trucks, so most Richland Hills opener repairs are completed same-visit. See our brands for the full list and what we stock.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Richland Hills, TX
| Service | Typical range in Richland Hills |
|---|---|
| Gate opener motor replacement | $450 – $900 |
| Gate opener gear replacement | $180 – $340 |
| Limit switch replacement | $120 – $250 |
| Control board replacement | $250 – $600 |
| Capacitor replacement | $90 – $180 |
| Hinge replacement (steel gate, standard) | $150 – $400 per hinge set |
| Post re-setting (clay soil, new concrete footing) | $400 – $1,200 |
| Full gate re-alignment | $200 – $500 |
| Photo-eye or safety sensor replacement | $110 – $220 |
| Low-voltage wire trace and repair | $150 – $450 |
The biggest price driver in Richland Hills is post condition: if clay movement has pulled a post far enough out of plumb, re-setting it costs more than replacing a gear or board. Second is gate weight; solid ornamental steel gates eat openers faster than lighter aluminum. Every quote is written and agreed before work starts, and the number on the invoice matches the number at the door.
Neighborhoods We Serve in Richland Hills
We work across the whole city, from the older ranch blocks east of Rufe Snow Drive to the newer gated developments on the west side. Richland Hills is compact, so we typically reach any address within the day for non-emergency calls and faster for urgent gate failures.
- Old Richland Hills (east of Rufe Snow Drive)
- Glenview
- Richland Hills West
- The neighborhoods around Richland Park
- Baker Drive corridor
Service Area – Cities Near Richland Hills
Calder Gate Repair schedules Richland Hills work from our Dallas-Fort Worth office, with crews dispatched locally. We also serve nearby cities, including Fort Worth, TX, North Richland Hills, TX, Keller, TX, and Colleyville, TX.
Serving Richland Hills, TX - Our Local Coverage Area
We’re based in the Richland Hills area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Richland Hills
For urgent failures like a gate stuck open, we typically reach Richland Hills within the same day and often within a few hours. A live person answers every call at (682) 432-9830, 24/7, and gives you a trackable arrival time, not a four-hour window.
Most gate repairs, including opener swaps and hinge replacements, don’t require a permit. If a new footing or substantial post work is needed, we’ll tell you what the city typically asks for so you can confirm with Richland Hills directly. We never start structural work without that conversation.
Every repair we make in Richland Hills carries a written guarantee. If the repair fails within 365 days, we return at no charge and make it right. It’s stated in writing on every job, not implied.
If your gate is acting up in Richland Hills, call (682) 432-9830. We’ll give you a written price before any work begins, a live arrival time, and a repair backed by the 365-Day Done Right Promise.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Richland Hills Customers Say
"Booked online. The tech texted his ETA and arrived on time. Gate opener was dead; he replaced the control board and tested the sensors."
- Terry W."Safety sensors realigned. Works fine. Photo eyes were dirty and out of line. Gate now stops when it should."
- Raul A."Booking was easy and the job was done quickly."
- Seth R.