Pedestrian Gate in Fort Worth, TX

Pedestrian Gate in Fort Worth, TX

A pedestrian gate is the smaller, walk-through gate that swings open beside your driveway gate so people don’t have to wait for the heavy automated one to cycle. In Fort Worth, where driveway gates across Tarrant County are built to handle everything from suburban traffic to long ranch-style approaches, the pedestrian gate takes real abuse. Kids slam it. Delivery drivers leave it unlatched. The wind whips it back against the post. Calder Gate Repair Fort Worth installs, replaces, and repairs pedestrian gates as a standalone service, because a good walk gate is usually the difference between a property that works and one that gets propped open with a rock.

We’re part of the home services family led by Nico Alvarez, and pedestrian gate work falls under our broader Gate Installation in Fort Worth service. If you need a full Gate Installation, we handle that too. But this page is about the walk-through gate specifically: what it costs, what goes wrong with it, and how we fix it. Call us at (682) 432-9830 for a free estimate. A live person answers 24/7, not a voicemail.

Key Takeaways

• Most pedestrian gate repairs in Fort Worth run $145 – $385 before parts, depending on what’s broken.
• New pedestrian gate installations typically range from $650 – $2,400, including the gate, hinges, latch, and post work.
• Common pedestrian gate failures in Fort Worth: sagging hinges, latch misalignment, stuck or broken posts, and rust at the bottom rail.
• Every pedestrian gate job from Calder Gate Repair Fort Worth includes a written price before work starts, a written guarantee, and a free second visit if the repair fails within 365 days.
• We’re factory-familiar with pedestrian gate hardware and openers from Ghost Controls, DoorKing, Elite, and Mighty Mule.

When You Need Pedestrian Gate

Here’s what we hear when someone calls us about a pedestrian gate in Fort Worth. You’ll recognize one or two of these:

• The gate drags or won’t close all the way. In neighborhoods like Ridglea Hills and Tanglewood, shifting clay soil moves posts just enough that a wood or steel pedestrian gate starts grinding against the latch side. You end up having to lift the gate to close it.
• The latch doesn’t catch. A pedestrian gate that won’t stay latched is one wind gust away from slamming all night. We see this constantly in open areas like Haslet, Saginaw, and far north Fort Worth near Eagle Mountain, where the wind comes through flat and hard.
• The post is loose or leaning. Pedestrian gate posts take more abuse than the driveway gate posts because people swing on them, push them, and sometimes hit them with bikes or lawn equipment. Once the post moves, the gate geometry is wrong and nothing lines up.
• Rust at the bottom rail or hinge welds. North Texas humidity and occasional ice storms are rough on steel gates, especially if the bottom rail sits close to the ground and holds water. We see early rust failures on pedestrian gates in Arlington Heights and other older Fort Worth neighborhoods where gates may be 15-plus years old.
• You want a keypad or latch upgrade. If your driveway gate has a Ghost Controls or Mighty Mule opener but the pedestrian gate still uses a basic thumb latch, we add keypads or electronic strikes so the walk gate works with the same access system.
• The gate is too heavy or too light for its hinges. A pedestrian gate should be built for its job: a wood gate on cheap strap hinges in a windy area like Benbrook or Crowley will sag within a season or two.

Our Pedestrian Gate Process

Here’s exactly how a pedestrian gate job works with Calder Gate Repair Fort Worth, from the first call to the final invoice:

1. You call (682) 432-9830 and talk to a live person. No phone tree, no call-back request. We take down what’s happening with your gate, ask a few questions about the post, hinges, and latch, and book a time. You get a trackable arrival window, not a four-hour range.
2. A background-checked, uniformed technician arrives on time. They inspect the gate, the post, the hinges, the latch, and the ground around the post. You get a written price before any work starts. That price is the price. No surprises at the door.
3. We walk you through the fix in plain language. If it’s a hinge issue, we’ll tell you whether it’s a bent leaf, a worn pin, or a post that has moved. If it’s a latch alignment problem, we’ll show you exactly where the strike plate and latch are off. You don’t have to be a gate expert to understand what you’re paying for.
4. We complete the repair or installation. For repairs, that’s typically hinges, latch, post reset, or rust-repair on the bottom rail. For new pedestrian gate installations, we set the post if needed, hang the gate, align the latch, and check the swing and clearance.
5. We document everything and email you the invoice. Before-and-after photos, a written summary of what was done, and a digital invoice you can pay from a link. That’s the Relay Standard: transparent from booking to billing.
6. You get the 365-Day Done Right Promise. If the pedestrian gate repair fails within 365 days, we come back at no charge. That’s stated in writing on every job, and it’s not optional.

Pedestrian Gate Pricing in Fort Worth

Pedestrian gate repair in Fort Worth typically runs $145 – $385 before parts depending on what’s actually wrong. A new pedestrian gate installation, including the gate itself, hinges, latch, and post work, generally lands between $650 and $2,400. Here’s the breakdown so you know what to expect before you call:

Pedestrian Gate Service	Typical Range in Fort Worth
Hinge repair or replacement (steel or wood gate)	$145 – $285
Latch and strike plate realignment	$125 – $225
Post reset or reinforcement	$225 – $385
Rust repair at bottom rail (steel gate)	$175 – $325
New pedestrian gate, basic steel or wood, includes hinges and latch	$650 – $1,400
New pedestrian gate, custom or ornamental steel, includes hardware	$1,200 – $2,400
Electronic keypad or strike addition to pedestrian gate	$275 – $650

Three things move the price: the condition of the post, the weight of the gate, and whether the hardware is standard or brand-specific. If you have a DoorKing or Elite system on the driveway gate and want the pedestrian gate tied into it, the keypad or strike work adds cost. If the post is rotted, cracked, or leaning, that has to be fixed first or the new gate won’t last. Nobody at Calder Gate Repair Fort Worth will give you a fake-low number over the phone and then change it at your door. The written estimate is the invoice price. Call (682) 432-9830 and we’ll give you a real number after looking at your gate. Estimates are free.

Pedestrian Gate Hardware We Work With

Most pedestrian gate problems are mechanical: hinges, latches, posts, and alignment. But when the walk gate has an electronic strike, a keypad, or a closer, the brand matters. We’re factory-familiar with the gear we work on, including Ghost Controls, DoorKing, Elite, and Mighty Mule. If your driveway gate runs on a DoorKing opener and you want a pedestrian gate that unlocks with the same keypad, we can do that. If you have a Mighty Mule system on a ranch entrance and need a simple walk gate with a heavy-duty spring closer, we know the right hardware for a North Texas wind load.

We don’t pretend “all brands are the same.” A Ghost Controls pedestrian gate strike wires differently than an Elite one. The wiring, the transformer sizing, and the control board inputs aren’t interchangeable. That’s why Calder trains on the specific systems, not just generic gate hardware.

Common Pedestrian Gate Problems by Fort Worth Neighborhood

Fort Worth isn’t one soil type and one wind pattern. What goes wrong with a pedestrian gate in Wedgwood is different from what breaks in north Fort Worth:

• Clay soil movement (Wedgwood, Ridglea, Tanglewood): The post shifts, the gate sags, the latch misses. We reset posts and add concrete collars to hold them in place.
• High wind areas (Haslet, Saginaw, Eagle Mountain, Benbrook): Gates get slammed, hinges bend, and latches fail from repeated impacts. We specify heavier hinges and positive-stop latches.
• Older housing stock (Arlington Heights, Ryan Place, Fairmount): Pedestrian gates are often original or poorly replaced, with undersized posts and thin-gauge steel. We rebuild them to modern weight and hardware standards rather than patching what’s already failed twice.
• Newer builds with driveway gate systems (Mira Vista, Montserrat, Walsh): The pedestrian gate is usually an afterthought to the automated driveway gate. The opener may be a Ghost Controls or LiftMaster, but the walk gate has a builder-grade latch that’s already loose. We upgrade the latch and align it properly with the post.

Why Calder Gate Repair Fort Worth for Pedestrian Gates

Three things are non-negotiable on any pedestrian gate job we take in Fort Worth. First, you get a written price before any work starts. Not a verbal quote, not a range, not “we’ll see when we get in there.” A written number. Second, you get a written guarantee on every repair. That’s the 365-Day Done Right Promise: if the repair fails within 365 days, Calder returns at no charge. And third, if we’re wrong and the fix doesn’t hold, the second visit is free. No negotiation.

We’re led by Nico Alvarez, who has been running gate work in the Fort Worth market long enough to know which hardware survives a Texas summer and which one wilts. Calder Gate Repair Fort Worth is part of the Relay Home Co. family, founded in 2009, and each location is independently owned and operated under the Relay Visibility Guarantee: you always know who’s coming, when they’ll arrive, and what the job will cost before the first bolt gets turned.

When you book with us, a live person picks up the phone. Always. The technician who shows up is background-checked, in uniform, and has a real, trackable arrival time on your phone. You don’t get a vague window. You don’t get a subcontractor you’ve never heard of. You get a Calder technician who knows pedestrian gate hardware and carries common parts on the truck.

FAQs – Pedestrian Gate

How much does a pedestrian gate cost in Fort Worth?

A new pedestrian gate in Fort Worth typically costs between $650 and $2,400 installed, depending on the gate material, hardware, and whether the post needs to be reset. Basic steel or wood gates with standard hinges and latch run on the lower end; custom ornamental steel gates and brand-integrated electronic hardware push toward the higher end. Call (682) 432-9830 for a free written estimate on your specific gate.

Can you fix a sagging pedestrian gate the same day?

Yes, in most cases hinge replacement, latch alignment, and post tightening on a pedestrian gate are same-day repairs for Calder Gate Repair Fort Worth. If the post is severely rotted or leaning, we may need to reset it in concrete, which can add a day for the concrete to cure. Call us and we’ll tell you what your specific gate needs after a quick inspection.

Is it cheaper to repair or replace a pedestrian gate?

If the gate frame and bottom rail are solid, repairing hinges, latches, or the post is almost always cheaper, typically $145 – $385 before parts. If the bottom rail is rusted through or the gate frame is bowed beyond straightening, replacement usually makes more sense, starting around $650. We’ll show you the condition of your gate and give you a written price for both options so you can decide with real numbers.

Do you work on pedestrian gates with electronic keypads or strikes?

Yes, we install and repair electronic keypads, strikes, and closers on pedestrian gates, including hardware that integrates with driveway gate systems from Ghost Controls, DoorKing, Elite, and Mighty Mule. The wiring and transformer sizing depend on the specific brand, and our technicians are trained on those systems. Call (682) 432-9830 and we’ll walk through what your setup requires.

What if the pedestrian gate repair fails after you leave?

If the pedestrian gate repair fails within 365 days, Calder Gate Repair Fort Worth returns at no charge. That’s the 365-Day Done Right Promise, and it’s stated in writing on every job we do. You don’t have to argue for it, and you don’t pay a second service fee.

Call for a Free Pedestrian Gate Estimate in Fort Worth

If your pedestrian gate is dragging, leaning, slamming, or just won’t latch, call Calder Gate Repair Fort Worth at (682) 432-9830. You’ll talk to a live person, get a real arrival time, and receive a written price before any work starts. We serve Fort Worth and the surrounding area, including Benbrook, Saginaw, Haslet, Crowley, and the neighborhoods in between. The estimate is free. The invoice is transparent. The repair is guaranteed for 365 days.

Written by Nico Alvarez, Owner at Calder Gate Repair Fort Worth, serving Fort Worth.