Automatic Gate Repair in Fort Worth, TX

Automatic Gate Repair in Fort Worth, TX

Automatic gate repair in Fort Worth typically costs between $185 and $425 for most opener and mechanism issues, and many jobs are completed the same day. If your gate won’t open, makes a grinding noise, or reverses before closing, you’re dealing with a repairable problem in the vast majority of cases, not a full replacement. Calder Gate Repair Fort Worth provides Gate Repair services across Tarrant County with written pricing before any work starts and a full-year warranty on every repair.

An automatic gate is a convenience until it isn’t. When the opener dies or the gate sticks halfway, you’re either trapped in your driveway or leaving your property exposed. We specialize in diagnosing and repairing the motors, control boards, sensors, and mechanical components that keep automatic gates running. From Gate Repair in Fort Worth to full opener replacements, our technicians show up in uniform, with a live arrival time you can track, and they carry parts for most major brands on the truck.

Call us at (682) 432-9830 anytime. A real person answers 24/7, not a voicemail tree.

When You Need Automatic Gate Repair

Most gate failures give you warning signs before they strand you completely. Here’s what Fort Worth homeowners call us about most often:

• Gate opens halfway and stops. This usually points to a bad limit switch – the small sensor that tells the gate when to stop – or an obstruction sensor that’s drifted out of alignment. Left alone, the opener motor burns out trying to finish the job.
• Grinding, screeching, or clicking when the gate moves. In Fort Worth’s clay-heavy soil, gate posts shift over time and put the hinge or rack out of alignment. That misalignment makes the motor work harder and produces exactly these sounds before something breaks.
• Gate reverses before it closes all the way. Safety sensors see an obstruction that isn’t there, or the force setting on the opener is out of adjustment. This is a common Ghost Controls and Mighty Mule symptom, and it’s usually a quick fix once we run diagnostics.
• Remote or keypad stopped working. Sometimes it’s the battery or a dead remote, but just as often the receiver board inside the opener has failed. We test the full signal path so we fix the right thing the first time.
• Gate works but moves slow or jerky. A failing capacitor, low voltage at the motor, or a worn drive belt can all cause this. Fort Worth’s summer heat accelerates capacitor failure – it’s one of the most common summer repairs we see in neighborhoods like Ridglea Hills and Summer Creek.
• Gate won’t respond at all. No noise, no movement, no response from any input. This is typically a control board issue or a dead transformer, and it’s where a multimeter beats guessing every time.

If you’re noticing any of these, don’t wait for the gate to fail completely. A gate stuck open overnight is a security risk for your home, and a gate stuck closed means someone’s missing work or school. We can usually diagnose and fix most of these issues in a single visit.

Our Automatic Gate Repair Process

You’ll know exactly what’s happening at every step. No vague time windows, no changing prices at the door.

1. Call and describe the problem. When you call (682) 432-9830, a live person answers and asks a few questions about your gate: brand, symptoms, how long it’s been acting up. That information helps us dispatch the right technician with the right parts.
2. Track your technician in real time. You get a live arrival time you can track from your phone, the same way you’d track a rideshare. Your technician arrives in uniform, background-checked, and ready to work.
3. We run a full diagnostic and show you the findings. Before turning a single bolt, we test the opener motor, control board, sensors, and mechanical components. We’ll show you what’s failed, explain it in plain English, and give you a written price for the repair.
4. You approve the price before any work starts. The number on the written estimate is the number on the invoice. If we find something unexpected mid-repair, we stop and call you before spending another dollar.
5. We complete the repair and test everything. We cycle the gate multiple times, check safety sensors, adjust force settings, and make sure remotes and keypads work. Then we walk you through what we fixed and answer any questions.
6. You get before-and-after photos and a digital invoice. The Relay Standard means you see exactly what was done, with photos and a digital invoice you can pay from a link. No paper shuffling, no phone tag.

Every automatic gate repair includes the 365-Day Done Right Promise in writing. If the repair fails within 365 days, Calder Gate Repair returns at no charge. That’s not a verbal promise – it’s on every work order.

Automatic Gate Repair Pricing in Fort Worth

Most automatic gate repairs in Fort Worth run between $185 and $425 before parts, depending on what’s failed. Here’s a breakdown of common repairs and How Much Does Gate Repair Cost? (2026 Price Guide) - Fort Worth, TX:

Repair Type	Typical Cost Range	What It Involves
Limit switch adjustment or replacement	$185 – $275	Replacing the sensor that tells the gate where to stop; includes calibration and testing.
Remote or receiver board repair	$165 – $260	Diagnosing signal issues, replacing receiver board if needed, reprogramming remotes.
Capacitor replacement	$180 – $240	Replacing the start capacitor that gives the motor its initial jolt; a common Fort Worth summer failure.
Safety sensor repair	$175 – $250	Realigning or replacing photo eye sensors that prevent the gate from closing on vehicles or people.
Control board replacement	$350 – $600	Replacing the brain of the opener – parts cost drives most of this range.
Full opener motor replacement	$600 – $1,200	New motor, remotes, and often a new control board; brand and horsepower affect cost.

What changes the price? The brand matters – DoorKing and Elite commercial-style openers use heavier-duty components that cost more than a light-duty Mighty Mule residential opener. The age of your system matters too: older gates often need additional parts you didn’t know were failing until we’re inside the housing. And the extent of electrical work matters – if a power surge damaged your transformer and wiring, that’s a bigger job than a simple sensor swap.

Every estimate is free, and it’s written down before any work begins. Call (682) 432-9830 and we’ll give you a real price range based on your gate’s symptoms and brand.

Brands We Repair in Fort Worth

Our technicians work on nine major gate opener brands. The most common ones we see in Fort Worth driveways:

• Ghost Controls – popular for residential swing gates, and we carry their parts on our trucks. Common issues: control board failures after lightning storms, sensor misalignment after heavy rain shifts the gate posts.
• DoorKing – built like tanks but with a control board that’s sensitive to power surges. We replace a lot of DoorKing circuit boards after the spring storm season in Fort Worth.
• Elite – another workhorse brand with a known weak point in the limit switch assembly. If your Elite gate stops mid-travel, that’s usually the culprit.
• Mighty Mule – the most common DIY-installed brand we service. No judgment here: we fix Mighty Mule openers regularly, including the MM series that’s everywhere in neighborhoods like Wedgwood and North Richland Hills.

If your opener is one of these or something else entirely, we’ll have a technician who knows it. The truck is stocked with common parts for all nine brands we service.

Why Fort Worth Homeowners Call Calder Gate Repair

We’re the gate repair specialist inside the Relay Home Co. family, founded in 2009. Each location is independently owned and operated under The Relay Visibility Guarantee. What that means for you is simple: you’ll know who is coming, when they’ll arrive, and exactly what the job costs before a single bolt is turned.

Nico Alvarez leads the Fort Worth location. He’s the person who built our diagnostic checklist around the specific failure patterns we see in Tarrant County: heat-stressed capacitors in July and August, control boards fried by spring lightning, gate posts shifted by the clay soil that expands and contracts with every rain and drought cycle. That local knowledge means we diagnose faster and fix things right the first time.

When you schedule with us, you’re getting:

• Written price before any work starts – always included, never optional, never a surprise.
• The 365-Day Done Right Promise – if the repair fails within 365 days, we return at no charge. In writing, on every job.
• A free second visit if the repair fails – included with every repair, no extra charge.
• Uniformed, background-checked technicians – dispatched with a live, trackable arrival time.
• A live person on every call, 24/7 – not a voicemail, not a chatbot. A real human who can book, update, or troubleshoot on the spot.

We don’t do vague four-hour windows. We don’t do “the estimate changed once we got inside.” We don’t do repair warranties that evaporate when you read the fine print. We put everything in writing because that’s the only way a guarantee means anything.

FAQs – Automatic Gate Repair

How much does automatic gate repair cost in Fort Worth?

Most automatic gate repairs in Fort Worth cost between $185 and $425 before parts, with the most common repairs – limit switches, sensors, and capacitors – falling on the lower end of that range. See our full How Much Does Gate Repair Cost in Fort Worth, TX? (2026 Price Guide) for more details. Control boards and full opener replacements cost more, typically $350 to $1,200 depending on brand and horsepower. Call (682) 432-9830 for a free, written estimate based on your specific gate.

Can you fix my automatic gate the same day I call?

Yes, in most cases we can repair your automatic gate the same day you call, especially for common issues like sensor misalignment, limit switch failures, and remote programming problems. Our technicians carry parts for Ghost Controls, DoorKing, Elite, Mighty Mule, and five other brands on the truck, which means fewer return trips and faster fixes. Call (682) 432-9830 early in the day and we’ll get a technician dispatched with a live arrival time you can track.

Is it cheaper to repair or replace my automatic gate opener?

Repair is almost always cheaper than replacement: a typical repair runs $185 to $425, while a full opener replacement runs $600 to $1,200 or more. You should consider replacement only if your opener is over 15 years old, has multiple failing components, or the motor itself has seized. We’ll always show you the repair cost and the replacement cost side by side so you can decide with real numbers, not a sales pitch.

Do you work on gates that were installed by someone else?

Yes, we repair automatic gates regardless of who installed them, including DIY installations. Many Mighty Mule and Ghost Controls openers in Fort Worth were homeowner-installed, and we fix those every week. We’ll inspect the full installation, not just the opener, because a poorly aligned post or a loose hinge can cause the opener to fail repeatedly. Our Gate Realignment service addresses these underlying issues. Every repair includes the 365-Day Done Right Promise in writing.

What brands of automatic gate openers do you repair?

We repair nine major brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Our technicians are factory-familiar with each brand’s known failure patterns, so we diagnose faster and carry the right parts on the truck. If your opener is older or less common, call (682) 432-9830 and we’ll confirm we can source the parts before you schedule.

Call Calder Gate Repair Fort Worth for Automatic Gate Repair

If your gate is acting up, call us at (682) 432-9830. You’ll get a live person on the phone, a free estimate with a written price before any work starts, and a repair backed by the 365-Day Done Right Promise. We serve all of Fort Worth and the surrounding Tarrant County area.

Your gate should open when you want it to and close when you need it to. Let’s get it working right – today.

Written by Nico Alvarez, Owner at Calder Gate Repair Fort Worth, serving Fort Worth.