Gate Repair Cost - Honest Price Ranges, Free Written Quote

How Much Does Gate Repair Cost in Fort Worth?

Most gate repairs in Fort Worth run between $150 and $600, with the typical job landing around $275. Gate opener replacement sits higher, usually $800 to $1,800 installed depending on the brand and gate weight. Those ranges reflect what we see across Arlington Heights, Wedgwood, TCU-Westcliff, and the neighborhoods along the Chisholm Trail corridor in 2026, and they include the parts, labor, and the trip out.

Calder Gate Repair Fort Worth puts every price in writing before the first tool comes off the truck. No hourly guesswork, no “we’ll see when we get in there.” We’ll tell you the number, you approve it, then we work.

Here’s the full breakdown of what gate repair costs in Fort Worth, what drives those numbers, and how to avoid paying for work you don’t need. If you want a real quote right now, call (682) 432-9830 and a live person answers, any hour.

Key Takeaways

• Typical gate repair in Fort Worth: $150 to $600, with most jobs around $275.
• Gate opener replacement: $800 to $1,800 installed for major brands like LiftMaster, FAAC, and Mighty Mule.
• Broken weld repairs on iron driveway gates cost between $180 and $450 depending on access and finish work.
• Emergency or same-day service in Fort Worth adds $75 to $150 to standard labor rates.
• Calder Gate Repair offers free estimates and a written price before any work starts. Call (682) 432-9830 to lock one in.

Gate Repair Cost Breakdown (2026)

These are the numbers we quote every week across Fort Worth. They reflect local labor rates, part costs from DFW suppliers, and the gate styles common to the area, from the older tube-steel swing gates in Ridglea to the newer aluminum slide gates in Walsh and Chisholm Trail Ranch.

Repair Type	Typical Cost Range (Parts & Labor)	How Long It Takes
Gate opener gear or limit switch replacement	$185 – $420	1 – 2 hours
Chain or belt replacement (slide gate)	$220 – $480	1.5 – 2 hours
Hinge weld repair (swing gate)	$180 – $450	1 – 2.5 hours
Control board replacement	$350 – $800	1 – 1.5 hours
Safety sensor alignment or replacement	$120 – $300	30 – 60 minutes
Full gate opener replacement (installed)	$800 – $1,800	2 – 4 hours
Gate wheel or roller replacement	$150 – $350	45 – 90 minutes
Post straightening or reset in concrete	$275 – $650	2 – 3 hours
Keypad or remote programming (single unit)	$85 – $150	20 – 40 minutes
Full gate installation (new, custom)	$2,500 – $7,000+	1 – 3 days

Those opener replacement numbers cover the hardware and the install for the brands we service daily: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. A LiftMaster LA400 swing opener or a Mighty Mule MM371W will land on the lower end of that range. A heavier slide gate with a FAAC 844 or Viking operator will push you closer to $1,800 once you account for the rail, chain, and the extra torque needed to move a 900-pound gate across a Fort Worth driveway.

The single biggest cost variable is whether the gate itself is structurally sound. If the post has shifted from clay soil movement, the hinges are worn oval, or the gate has sagged enough to drag, no new opener will last. A good technician fixes the mechanical problem first, then the electronics. Skip that step and you’ll be paying for the same repair twice.

What Affects Gate Repair Pricing in Fort Worth

• Gate type and weight. A 14-foot steel slide gate at an entry off Camp Bowie costs more to repair than a 6-foot aluminum walk gate. Heavier gates strain motors, hinges, and wheels harder, and they require more labor to adjust and re-level.
• Opener brand and parts availability. LiftMaster parts are widely stocked in the DFW area, so those repairs are often faster and cheaper. FAAC and BFT components sometimes ship from regional distributors, which can add $30 to $60 in freight if we don’t have the part on the truck.
• Access and site conditions. Gates set into stone pillars, gates with no pedestrian access nearby, or gates that require cutting into a welded post take longer. Time is the main labor cost driver on any repair.
• Soil movement and gate alignment. Fort Worth sits on expansive clay, and the freeze-dry-swell cycle every spring shifts gate posts slightly. Gates that were perfectly aligned three years ago in Benbrook or Saginaw will gradually bind, drag, or fail to close fully. Realignment work adds $80 to $200 to a job depending on how far things have moved.
• Emergency or same-day scheduling. A 10 PM lockout at a house off River Oaks Boulevard or a gate stuck open on a rental property in Stop Six needs immediate attention. Same-day service carries a $75 to $150 premium, which we state clearly before we dispatch.
• Safety system condition. Gates built before 2016 may not meet the current UL 325 safety standards for entrapment protection. If we’re repairing an older opener, we always recommend adding or replacing the photo eyes and edge sensors for a compliant setup. That adds $120 to $300, but it protects kids, pets, and delivery drivers, and it’s required if the gate ever gets inspected or sold.

How to Save on Gate Repair

The most expensive gate repair is the one you pay for twice. Here’s how to avoid that, and how to keep your costs down without cutting corners.

Fix the mechanical problem before the electronic one. If your gate opener is struggling, the issue may not be the motor at all. We regularly see Fort Worth gates where the opener was replaced six months ago, but the gate still drags because the post shifted or the hinges seized. A $200 hinge repair can save you a $900 opener replacement. A trained technician checks the gate’s balance and travel first, which is exactly what Calder does on every diagnostic visit.

Schedule repairs before the gate fully fails. A gate that beeps longer than usual, reverses halfway, or slows down on one side is telling you something. Addressing those warning signs costs less than a total opener failure, and it prevents the security gap of a gate stuck open overnight.

Ask about refurbished or rebuilt opener parts. For older LiftMaster and Elite models that are no longer manufactured, a rebuilt control board can save $150 to $300 compared to a full board replacement. Calder will always quote options before we touch anything.

Bundle small fixes into one trip. If the technician is already out for a limit switch, and you know the keypad is flaky or a hinge is squealing, mention it. The trip fee is absorbed into one invoice, and additional small repairs are charged at a reduced incremental rate.

Get the written estimate first. It costs you nothing to get a real number before work begins. Calder Gate Repair Fort Worth gives every customer a written price before any work starts. If you want to compare it against another quote, you’ll have it in writing. Call (682) 432-9830 and we’ll schedule a diagnostic, give you the number, and you decide.

Common Gate Repair Jobs and What They Cost in Fort Worth

Gate Opener Limit Switch Replacement

A limit switch is the small sensor that tells the gate when to stop at open and closed. When it fails, your gate will slam, grind, or stop six inches short. Replacement runs $185 to $420 in Fort Worth, depending on whether it’s a single switch or a dual-switch assembly on a slide gate operator. On LiftMaster and BFT units, the switch is usually a $30 part; the rest is calibration labor to make sure the gate stops exactly where it should, every time.

Control Board Replacement

Control boards are the brain of your gate opener. Lightning strikes, power surges after summer storms, and ant colonies (a serious problem in Fort Worth yards) kill boards regularly. A replacement board typically costs $350 to $800 installed. On higher-end FAAC and Viking units, a new board can hit $600 to $800. Calder technicians carry boards for all nine major brands we service, so most board replacements are one-visit jobs.

Hinge and Weld Repair

Fort Worth swing gates fail at the hinges first. The repeated open-close cycle, wind loads, and gate weight stress the welds and hinge pins until they crack or oval out. A single hinge and post repair runs $180 to $450. If both hinges are shot and the post needs reinforcement plate work, expect the higher end. We weld on-site, and our techs grind and repaint the repair area before they leave, so you won’t see a raw weld scar on your gate a month later.

Safety Sensor Replacement

Photo eyes and edge sensors are the components that stop the gate from closing on a person, pet, or car. In neighborhoods with lots of kids and delivery traffic, like Fairmount and the Near Southside, these sensors take a beating. Replacing or reinstalling safety sensors runs $120 to $300. If your gate is older and lacks entrapment protection entirely, a full retrofit with photo eyes and a wireless edge kit will land closer to $350 to $500, and it’s worth every dollar for the liability protection alone.

Gate Opener Replacement (Full Install)

When a gate opener is beyond repair, a full replacement runs $800 to $1,800 installed in Fort Worth. The spread depends on whether we’re installing a lift-and-turn residential swing opener like the LiftMaster LA400 or a heavier slide operator for a driveway gate. The hardware itself is $400 to $1,200; the rest is labor, wiring, safety sensor installation, and programming remotes and keypads. Calder technicians train on nine major opener brands, so whatever we install, we already know the programming, the quirks, and the failure patterns.

Is It Cheaper to Repair or Replace a Gate Opener?

The short answer: repair is usually cheaper if the opener is under 8 years old and the failure is isolated to a single component like a limit switch, capacitor, or gear. Replacement makes more sense when the opener is over 12 years old, the board and motor are both failing, or the unit lacks modern safety features.

Here’s the real math we walk customers through in Fort Worth:

• Opener under 5 years old: repair almost always wins. A $200 gear replacement beats a $900 install.
• Opener 5 to 10 years old: it depends on the brand and the specific failure. LiftMaster and Linear units in this range are often worth repairing. Budget FAAC models nearing a decade old might not be.
• Opener over 12 years old: replacement is usually the better financial move. Parts for discontinued models get scarce, and you’re not required to bring an old opener up to current UL 325 safety standards if you’re only repairing it, but a replacement gives you a warranty and modern entrapment protection.

If you’re not sure which side of the line your opener falls on, call (682) 432-9830. We’ll diagnose it, tell you the repair cost and the replacement cost side by side, and you make the call with real numbers in front of you.

Fort Worth Gate Repair: What Locals Need to Know

Fort Worth gates take a specific kind of abuse. The summer heat bakes the powder coat off steel gates and warps composite panels. Spring thunderstorms bring lightning strikes that fry control boards in the older neighborhoods where surge protection was never installed on the gate circuit. And the clay soil underneath Fort Worth shifts with every wet-dry cycle, which means gates that were dead level in 2020 are dragging and binding by 2026.

That’s why the neighborhoods we work in most, like Arlington Heights, Mistletoe Heights, Monticello, and the new builds out by Alliance, all show specific failure patterns. Older iron gates are more likely to need hinge and weld work. Newer slide gates on the suburban lots are more likely to have opener board and sensor issues. The gate itself tends to be fine; the electronics and the moving hardware give out first.

If you’re searching for gate repair near me in Fort Worth, TX and your gate is acting up, the fastest way to get an accurate number for your specific gate is a diagnostic visit. Calder Gate Repair Fort Worth offers free estimates. Call (682) 432-9830 and a live person will answer, 24/7.

How Calder Gate Repair Works

We’re the dedicated gate repair specialist inside the Relay Home Co. family, which has been serving Texas homeowners since 2009. Nico Alvarez leads our Fort Worth operation, and every technician who works under the Calder name is background-checked, uniformed, and factory-familiar with nine major gate opener brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule.

Here’s what a Calder Gate Repair visit looks like, start to finish:

1. You call (682) 432-9830. A live person answers, no phone tree, no voicemail. Tell us what the gate is doing, and we’ll give you a straight answer on whether it’s a likely quick fix or a bigger job.
2. We give you a live, trackable arrival time. Not a four-hour window. You’ll see exactly when the technician will arrive, and you can follow them in real time.
3. Diagnostic and written price. The technician examines the gate, the opener, the hinges, the sensors, and the post condition. Then you get a written price before a single bolt is turned. The number on the invoice is the number you approved at the door.
4. Repair, done right. We fix the job the same visit in most cases. If it’s a bigger job that requires ordered parts, we’ll tell you that upfront and schedule the return before we leave.
5. Digital paperwork and the 365-Day Done Right Promise. You get a digital invoice you can pay from a link, plus before-and-after photos of the work. Every repair carries our 365-Day Done Right Promise in writing: if the repair fails within 365 days, Calder returns at no charge. If the repair isn’t right, we make it right. That’s the guarantee on every job, no exclusions, no fine print.

This is the booking-to-invoice experience we call the Relay Standard. Every part of it is designed so you always know who is coming, when they will arrive, and exactly what the job will cost before the work starts.

FAQs – Gate Repair Cost

How much does gate repair cost in Fort Worth on average?

Most Fort Worth gate repairs cost between $150 and $600, with the average job landing around $275. Simple fixes like keypad reprogramming start around $85, while control board replacements on FAAC or Viking openers can hit $800. Call (682) 432-9830 for a written estimate on your specific gate.

How much does it cost to replace a gate opener in Fort Worth?

A full gate opener replacement in Fort Worth runs $800 to $1,800 installed, including the opener hardware, wiring, safety sensors, and programming. LiftMaster and Mighty Mule units typically fall on the lower end; heavier FAAC and Viking slide operators on wider driveways land higher. Calder quotes the full installed price before any work starts.

Can you repair a bent or sagging gate in Fort Worth?

Yes, a sagging or bent gate typically costs $180 to $650 to repair in Fort Worth, depending on whether the fix requires hinge replacement, weld repair, post resetting, or a combination. Gates that drag because of shifted posts from clay soil movement are common across the area, and we address the structural issue before adjusting the opener.

Why is my gate opener beeping but not moving?

That beeping usually comes from the safety sensors or a battery backup fault, and the fix typically runs $120 to $300 for sensor replacement or reprogramming. If the control board is the source, expect $350 to $800. Calder technicians diagnose the exact cause on-site and quote the repair before starting work.

Does Calder Gate Repair charge extra for same-day or emergency service?

Same-day and emergency gate repair in Fort Worth carries a $75 to $150 premium on top of the standard repair rate. The added cost covers immediate dispatch and the trip out, and Calder states it clearly when you call, so there are no surprises. Call (682) 432-9830 and a live person will tell you the exact same-day rate for your location.

Is it cheaper to repair a gate opener or replace it?

Repair is usually cheaper for openers under 8 years old, with component repairs like gear replacements running $185 to $420 versus $800 to $1,800 for a full replacement. For openers older than 12 years, replacement is often the smarter long-term investment. Calder quotes both options so you can compare the numbers side by side.

City & Service Areas

We provide Gate Repair in Fort Worth for homeowners across the city, including Arlington Heights, Ridglea, Wedgwood, TCU-Westcliff, Mistletoe Heights, Monticello, Fairmount, the Near Southside, Benbrook, Saginaw, White Settlement, and the new developments around Walsh and Chisholm Trail Ranch. If you’re in a newer community off of Chisholm Trail Parkway or out toward Haslet, the drive time is quick, and the same written-price guarantee applies everywhere we go.

If you’re on the fence about whether you even need a pro, start with our home page and give us a call. A two-minute conversation with a live technician usually tells us whether it’s a quick adjustment or a real repair, and we’ll tell you straight either way.

Get a Written Gate Repair Estimate in Fort Worth

The fastest way to know exactly what your gate repair will cost is to call us. Calder Gate Repair Fort Worth answers every call with a live person, 24 hours a day, 7 days a week. We’ll ask a few questions about your gate, the opener brand, and what it’s doing (or not doing), and we’ll give you an honest read on what the likely cost is before anyone even gets in a truck.

Every repair comes with three things in writing: the price before work starts, the 365-Day Done Right Promise guaranteeing the repair for a full year, and a free second visit if anything fails on our work. Call (682) 432-9830 now for a free estimate, a live trackable arrival time, and a gate repair done right the first time.

Pricing reflects the Fort Worth market as of 2026. Calder Gate Repair Fort Worth offers free estimates – call (682) 432-9830.

Written by Nico Alvarez, Owner at Calder Gate Repair Fort Worth, serving the Fort Worth area since 2009.